0
What else can I help you with?
What is central hub called in star topology?
in star topology , the central hub is called...... (i) active hub (ii) passive hub (iii) inactive hub (iv) live hub
Which topology requires a central controller or hub?
Star topology
What a star topology uses a to connect all of the nodes?
A star topology uses a central network device, such as a hub or a switch, to connect all nodes in the network. Each node is connected directly to the central device, creating a centralized architecture that simplifies network management and troubleshooting.
Which Topology there is a central controller or hub?
In a star topology, there is a central controller or hub. This hub acts as a central point for all network devices, allowing them to communicate with each other through it. If one device fails, it does not affect the others, making troubleshooting easier. However, if the central hub fails, the entire network goes down.
What type of device is usually found at the center of an extended star topology?
both hubs and switch can act as a center of a star topology
Is star topology the faster of all topology?
No, because there is a hub between star topology and every station connect to that central hub. hub cause broadcast and congession since packet loss is more likely to occur. I suggest that mesh topology is more faster as there is a dedicated link to each node.
Which topology uses a hub?
I say Star Topology. Watch this video: http://www.youtube.com/watch?v=ihb_qa6qTbE It explains different topologies. Good luck
Which topology uses a central device for point-to-point connections to other devices?
A star topology; a network topology in which endpoints on a network are connected to a common central device by point-to-point links.
What physical network topology has the inherent weakness of a single point of failure?
The physical network topology that has the inherent weakness of a single point of failure is the star topology. In a star topology, all devices are connected to a central hub or switch. If this central device fails, the entire network becomes inoperable, as all communication relies on it. This makes the network vulnerable to disruptions if the hub experiences any issues.
In ring topology what is each node attached to?
For a ring topology each client device is usually attached to a central hub, which is a managed hub, called an MAU or MSAU unit. It contains a grid that manages the electrical portion of the ring.
How to make construction of Star Topology?
To construct a star topology, begin by placing a central hub or switch at the center of the network. Connect all network devices, such as computers and printers, to this central hub using individual cables. Ensure that each device has a dedicated point-to-point connection to the hub, which allows for easy management and troubleshooting. Finally, configure the network settings on each device to facilitate communication through the central hub.
Purpose of star topology?
A star network uses a central server to route data between clients. The central server (or the switching hub) switches data around the network. Data flow between the server and the nodes will therefore be relatively low. A typical star network are mainframe computers. Star topology, also known as star network, is a computer network topology. It is a common network setup where the computers and other devices on the network are connected to a central or master computer, also known as the hub.
