0
What else can I help you with?
What wire size is good for 100 amps?
# 4 copper wire short distance.
What size wire for 100 amp?
A #3 copper wire with an insulation rating of 75 or 90 degrees C is rated at 100 and 110 amps consecutively.
How do you solve for the size of wire when the given is kva?
The V stands for volts and A is amps. If for example you have a 12kVA device and are running off a voltage of 120 volts then Amps = 12000/120 = 100. You then use the calculated amps in a wire size table to get the correct size.
What is the max amps for a 4 gauge wire can 4 gauge feed a 100A breaker box?
Yes, # 4 AWG copper and 100 amps is the max.
What is the required wire size wire for 100 amp service?
A #3 copper wire with an insulation factor of 75 and 90 degrees C is rated at 100 and 105 amps respectively.
What wire size is good for 100 amps?
# 4 copper wire short distance.
Can work wire for 100 amps use for 60 amps circuit?
If you have 100 amp wire, you can use it for a 60 amp circuit, or for any circuit of 100 amps or less. But if you have a 60 amp circuit, 60 amp wire is thinner and cheaper than 100 amp wire.
What wire size to carry 16 amps 100 ft?
14
What size wire for 100 amp?
A #3 copper wire with an insulation rating of 75 or 90 degrees C is rated at 100 and 110 amps consecutively.
What gauge wire would you need to carry 100 amps at 12 volts dc?
A #3 copper wire with an insulation factor 90 degree C is rated at 105 amps.
What is the amp rating for a 4/3 wire?
The amp rating for a 4/3 wire is typically around 100 amps.
What is the amp rating for a 4 gauge wire?
The amp rating for a 4 gauge wire is typically around 100-150 amps.
What is the amp rating for a 3 gauge wire?
The amp rating for a 3 gauge wire is typically around 85-100 amps.
How many amps is 4 wire good for?
According to the 2008 NEC Code Book a #4 AWG Copper wire is rated at 95 Amps @ 90C (194 F), 85 Amps @ 75C (167 F), and 70 Amps @ 60C (140 F). These allowable amperage ratings are based on the wires type of insullation.
Need to run 30 amps about 100 feet what copper wire?
This is a voltage drop question. A voltage at 30 amps needs to be stated to answer the question.
How do you solve for the size of wire when the given is kva?
The V stands for volts and A is amps. If for example you have a 12kVA device and are running off a voltage of 120 volts then Amps = 12000/120 = 100. You then use the calculated amps in a wire size table to get the correct size.
Does an electric stove burner use 220 or 110?
The burners will most likely be 240V. By keeping the range at 240 volts it will use less amps that at 120V. Say a range and oven is rated at 9000 watts. Watts = amps x volts. 9000/240V = 37.5 amps. 9000/120V = 75 amps. As you can see at 120 volts the amperage is double over 240 volts. You would need a 100 amp breaker and #4 wire to accomodate the range on 120 volts.
