Yes, there is no reason why this can not be done. In fact a benefit of this is that every receptacle downstream from this new receptacle will also be protected by the GFCI receptacle.
A down stream receptacle that is connected to the upstream GFCI will be protected. If the downstream receptacle senses a fault the upstream GFCI will trip.
code states that if a water source such as a sink is within 6 feet of a receptacle, that recetacle (s), must be protected by a GFCI receptacle. I believe the actual distance is 5 feet. Please forgive me if I'm wrong. But the NEC also requires that ANY counter top receptacles in a kitchen and receptacles ANYWHERE in a bathroom must be GFCI protected. More directly to your question, ordinary receptacles can be protected from a GFCI receptacle if properly wired. They are designed to do that. It is a way to save money. You may also consider a GFCI breaker if you have many receptacles to protect. I was told once that there is a limit of 3 "piggy backed" receptacles per GFCI but I have never seen that in the NEC.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
How far do u put a GFCI receptacle from water
Yes, there is no reason why this can not be done. In fact a benefit of this is that every receptacle downstream from this new receptacle will also be protected by the GFCI receptacle.
Most probably the receptacles downstream from the GFCI would not be protected by the GFCI receptacle.
Usually no. Not unless the receptacle is in the vicinity of standing water. This is to protect the person that has to disconnect the plugged in device from the receptacle, while standing in the adjacent water.
A down stream receptacle that is connected to the upstream GFCI will be protected. If the downstream receptacle senses a fault the upstream GFCI will trip.
Yes, all kitchen outlets need to be GFCI protected to prevent electrical shocks and ensure safety.
code states that if a water source such as a sink is within 6 feet of a receptacle, that recetacle (s), must be protected by a GFCI receptacle. I believe the actual distance is 5 feet. Please forgive me if I'm wrong. But the NEC also requires that ANY counter top receptacles in a kitchen and receptacles ANYWHERE in a bathroom must be GFCI protected. More directly to your question, ordinary receptacles can be protected from a GFCI receptacle if properly wired. They are designed to do that. It is a way to save money. You may also consider a GFCI breaker if you have many receptacles to protect. I was told once that there is a limit of 3 "piggy backed" receptacles per GFCI but I have never seen that in the NEC.
When installing a GFCI receptacle outdoors, it is important to consider safety measures such as ensuring the receptacle is weatherproof and protected from moisture, using a weatherproof cover, and following proper installation guidelines to prevent electrical hazards.
Yes, all outlets in the kitchen, including those for appliances and countertop outlets, should be GFCI protected to prevent electrical shocks and ensure safety.
Your GFCI receptacle may not be working due to a tripped circuit, a faulty GFCI receptacle, or a wiring issue. It is important to troubleshoot and potentially replace the receptacle to ensure safety and functionality.
All receptacles in a garage must be GFCI protected by code. Typically, the first receptacle in the circuit (location is irrelevant) must be a GFCI, then all others down stream in the circuit will be protected, and can be common receptacles.
No point on a countertop can be more than 24 inches from a receptacle per NEC 210.52. They have to be GFCI outlets per NEC 210.8.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.