0
What else can I help you with?
What size wire do you need for a 150 amp breaker?
A #6 copper ground conductor would be needed.
Is a copper wire a ground wire?
Yes, if it is not an insulated wire. If it is bare copper it is always ground. But the hot and neutral wire are also copper, they are just insulated.
What size Aluminum wire is used for ground in breaker box?
For a 100 Amp breaker panel it would be 2 AWG. For 150 Amps it would require 2/0 (2 ought) aluminum wire.
How do I rewire an ungrounded plug?
If there is no ground wire connect the ground wire to the neutral wire.
How do I test for a ground wire?
Check the continuity of the ground wire from both the ends. Ensure the ground wire is properly connected to earth / ground terminals
What size wire do you need for a 150 amp breaker?
A #6 copper ground conductor would be needed.
What do you need and how can you install a ground cable if your 240V outlet doesn't have a ground wire?
You need a 3 conductor wire with ground. For example if you had a 30 amp breaker for that outlet you would need 10awg 3w/ground. That's 10 gauge 3 conductor with ground and replace the old wire back to the panel.
What do you do with the ground wire when installing a new thermostat that doesn't have a connection for the ground wire It's a 4 wire Honeywell thermostat Is it ok to not connect the ground wire?
That Thermostat is LOW voltage. IT does not have a ground wire. There is no need for a ground. it only opperates on 24 volts. there may be a green wire but it does not mean it is a ground
How do you bypass the e break for the dual dvd710?
Easy, Ground it with your stereo ground wire.... (make the pink wire and black wire connect to the Main Ground wire which is also Black)
Is a copper wire a ground wire?
Yes, if it is not an insulated wire. If it is bare copper it is always ground. But the hot and neutral wire are also copper, they are just insulated.
Is a wire marked comm a ground wire?
Probably not. We'd need to know what the wire goes to in order to be certain about this.
What size Aluminum wire is used for ground in breaker box?
For a 100 Amp breaker panel it would be 2 AWG. For 150 Amps it would require 2/0 (2 ought) aluminum wire.
How can you test a fuel pump out of the tank?
You can test the fuel pump by touching the positive wire on the positive post of the battery. You will need to ground the ground wire.
How do you ground a plastic box ground wire attached to GCFI and ground at fuse panel. Do I need to ground at the box itself as well?
If the plastic box has a ground wire attached to the GFCI and the ground at the fuse panel, you do not need to ground the box itself. As long as the ground wire is connected to the GFCI and the fuse panel, the box will be effectively grounded. Just ensure that all connections are secure and properly fastened.
What do you need for subwoofers?
well you need a box first off. then you need an amp. and then an aftermarket CD player with sub outputs in the back. then you need speaker wire, and and amp installation kit (or long power wire, like 5 feet max of ground wire, and remote wire (which is just ordinary primary wire), and you will also need to buy long rca cord with male ends on both siddes
Does the ground wire on a 200 amp panel need to be looped through both ground rods?
No, the ground wire on a 200 amp panel does not need to be looped through both ground rods. The ground wire typically needs to be connected to the grounding electrode system, which may include ground rods, but it does not need to loop through them. It is important to follow local electrical codes and guidelines when installing grounding systems.
What is meant by ground wire?
It means a wire in the ground.
