0
Add your answer:
Earn +20 pts
SSO electrical Wiring?
switch socket outlet
Could you show me an electrical drawing of a circuit with GFCI protecting a switch?
GFCI's are not used to protect a switch they are used to protect an outlet where something is plugged in.
What is the difference between single pole switch and a three way?
A single pole switch controls a light or outlet at one location. A 3 way switch controls a light or outlet from 2 locations.
What is the PEC requirement regarding the standard heights for switches and outlets?
one foot from ground floor distance outlet five foot distance switch
How do you disconnect a light switch and outlet that are tied together?
If there is a black wire going from the outlet to the switch and the other side of the switch goes back to the outlet then just cut these wires and connect supply wire directly to outlet. If the supply goes to the switch first, disconnect from switch and connect the two wires with a wire-nut. Some situations only switch one of the two outlets in a duplex device. Do the same thing, but also replace the outlet since the strapping between both outlets has been removed.
Can you wire a switch from an electrical outlet?
yes
SSO electrical Wiring?
switch socket outlet
Why does the light switch not work to an existing electrical outlet?
Could be a loose connection somewhere, or a bad switch, or a bad outlet.
Need to get power from existing wall outlet to a switch?
To get power from an existing wall outlet to a switch, you will need to run a new electrical cable from the outlet to the switch location. Turn off the power to the outlet, install a new electrical box for the switch, and then connect the new cable to the outlet and the switch following the appropriate wiring diagram. Finally, install the switch into the electrical box and test to ensure it is functioning correctly.
Can you wire a switch downstream from an outlet?
Yes, you can wire a switch downstream from an outlet by connecting the switch to the hot wire (black) from the outlet. The hot wire would then be interrupted by the switch before continuing to the outlet, allowing you to control the power to the outlet with the switch. Always ensure to turn off the power before working on any electrical components.
Why does energy keep flowing through an electrical cord even if it's connected to a power outlet?
Uh, because you left the switch on for what you had plugged in to the outlet.
Can you install an electrical switch before a gfci?
Yes, an electrical switch can be installed before a GFCI outlet in a circuit. Just ensure that the wiring is done correctly, following all safety guidelines and local electrical codes. The GFCI outlet should be properly connected to the power source and the switch should be wired to control the flow of electricity to the outlet.
Write the steps to switch on a computer?
The steps to switch on a computer begin with making sure that the computer and its peripherals are plugged into an electrical outlet. Turn the power switch on the electrical outlet and press the power button on the computer tower. Turn on the computer monitor and wait for the computer system to start up.
Could you show me an electrical drawing of a circuit with GFCI protecting a switch?
GFCI's are not used to protect a switch they are used to protect an outlet where something is plugged in.
What is the difference between single pole switch and a three way?
A single pole switch controls a light or outlet at one location. A 3 way switch controls a light or outlet from 2 locations.
What is the PEC requirement regarding the standard heights for switches and?
one foot from ground floor distance outlet five foot distance switch
What is the PEC requirement regarding the standard heights for switches and outlets?
one foot from ground floor distance outlet five foot distance switch
