0
A #12 aluminium conductor with an insulation factor of 75 or 90 degrees C is rated at 15 amp. Therefore the largest size breaker to protect that wire will be a breaker rated at 15 amps.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What size circuit breaker for GFCI circuit in a normal size bath?
Normally it is a 20 amp using AWG 12/2 gauge wire. But it really depends on what size wire is on that circuit. If it is white AWG 14 gauge then use a 15 amp breaker. If it is yellow AWG 12 gauge then use a 20 amp breaker.
What size Aluminum wire is used for ground in breaker box?
For a 100 Amp breaker panel it would be 2 AWG. For 150 Amps it would require 2/0 (2 ought) aluminum wire.
What is the maximum breaker size for these gauges wire?
You listed no gauge wire. This is the required breakers.14 gauge - 15 amp12 gauge - 20 amp10 gauge - 30 amp8 gauge - 40 amp
What is the wire size required for 1800 watts for lamps?
14 gauge will handle it with a 15 amp breaker. If you use 12 gauge use a 20 amp breaker.
What size breaker would e needed for 10.8 amps?
In standard construction this would require a 15 amp breaker and 14 gauge copper wire.
What size copper wire is equal to 0 aluminum?
Copper wire gauge sizes are not equivalent to aluminum wire gauge sizes. The gauge sizes for copper and aluminum wires are different due to their differing electrical conductivity properties. It is not possible to directly convert a copper wire size to an equivalent aluminum wire size.
14 gauge wire can be on what size circuit breaker?
A 14 gauge wire is typically used on a 15 amp circuit breaker. It is not recommended to use a larger circuit breaker with a smaller wire size as this can create a fire hazard.
What size amp circuit breaker should be used in a kitchen with aluminum wire?
Don't use aluminum wire inside the house.
What size circuit breaker for GFCI circuit in a normal size bath?
Normally it is a 20 amp using AWG 12/2 gauge wire. But it really depends on what size wire is on that circuit. If it is white AWG 14 gauge then use a 15 amp breaker. If it is yellow AWG 12 gauge then use a 20 amp breaker.
What size breaker should be used on a 20 amp motor?
30 amp breaker with #10 gauge copper wire
What size Aluminum wire is used for ground in breaker box?
For a 100 Amp breaker panel it would be 2 AWG. For 150 Amps it would require 2/0 (2 ought) aluminum wire.
What is the maximum breaker size for these gauges wire?
You listed no gauge wire. This is the required breakers.14 gauge - 15 amp12 gauge - 20 amp10 gauge - 30 amp8 gauge - 40 amp
Can aluminum 600v wire work a 40 amp breaker?
Wire size is rated by Amperes of current. You did not mention the wire size of the aluminum wire, so there is no way to answer your question. The voltage rating is more a rating of how good the insulation around the wire is.
What is the wire size required for 1800 watts for lamps?
14 gauge will handle it with a 15 amp breaker. If you use 12 gauge use a 20 amp breaker.
How big of a single pole breaker can you put on 12-2 wire?
You can use a 20-amp single pole breaker for 12-2 wire. This is the standard size breaker for 12-gauge wire in residential applications.
What size main breaker do you need to run 10 gauge wire?
The size of the main breaker depends on the maximum current rating of the 10 gauge wire and the load it will be powering. Typically, a 10 gauge wire is rated for a maximum current of 30 amps. Therefore, a 30 amp main breaker would be suitable for running 10 gauge wire. However, it is important to consult local electrical codes and consider the specific load requirements before making a final determination.
What Size breaker for 6 gauge wire?
For 6 gauge wire, typically you would use a 60 amp breaker for larger appliances like a dryer or cooktop. However, always consult with a licensed electrician to ensure the proper breaker size for your specific application and local electrical code requirements.
