answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What size cable size for 150 amp?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What size wire cable and fuse for a 9.8KW shower?

7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size


What is the cable size required for a 400 amp and 350 amp load?

350mcm


What is the cable size for 1 to 100 Amp current list?

25mm cable


What cable for 150 amp Service Entrance Cable?

For a 150 amp service entrance cable, you would typically use 2/0 AWG (American Wire Gauge) copper or 4/0 AWG aluminum cable. This size provides the necessary capacity to handle the electrical load of a 150 amp service. It's recommended to consult with a licensed electrician for specific guidance based on your local electrical code requirements.


What would the cable size be for a 90 meter armoured cable with a 110 amp supply with a 330 amp start up?

To calculate voltage drop to size the wire, a voltage must be stated.


What is the cable size required for a 250 amp and 160 amp load?

For a 250 amp load, a cable size of at least 3/0 AWG (American Wire Gauge) or 70mm^2 is recommended. For a 160 amp load, a cable size of at least 1/0 AWG (American Wire Gauge) or 50mm^2 is recommended. It is important to consult local electrical codes and regulations to ensure compliance.


What size aluminum cable for 100 amp service?

2 AWG Aluminum.


What size cable is required for 220 v with twin 30 amp breakers?

#10 wire is used on a 30 amp service.


What size cable for 30 amp cooker socket?

6 mm twin and earth


What size aluminum entrance cable for 100 Amp service?

2 AWG Aluminum.


Do you need to change the wire size going from 100 amp service to 150 amp service?

Yes, the wire size has to be increased. The existing 100 amp service will now probably have a #3 conductor with an insulation factor of 75 or 90 degrees C which is rated for 100 and 105 amps respectively. Increasing to a 150 amp service will use a #1/0 wire size. If you are thinking of an upgrade, skip the 150 amp service and go to a 200 amp panel. New homes are installing 200 amp 42 circuit panels. The extra cost is only reflected in the materials as the labour costs will be the same regardless whether a 150 amp or a 200 amp panel is installed. The wire size for a 200 amp panel is #3/0. With an insulation factor of 75 or 90 degrees C the rating is 200 or 210 amps respectively.


Can you install a 150 amp meter base and still have a 100 amp main panel?

The wire size in a meter stack is governed by the size of the first over current device.