0
Add your answer:
Earn +20 pts
How much rain falls at the rate of 1 inch per hour?
An inch of rain implies water one inch deep per surface area. An inch of rain equals 5.61 gallons per yard. An inch of rain equals 27,150 gallons per acre.
If you dig a one acre pond 20 ft deep how many yards of dirt will you get?
32,266 CY
How many gallon are in 15 inches?
4.578 gallons for every inch the water is deep.
How many gallons of water is needed to fill a pool 15' diameter by 42 deep?
Is 42 in inches or feet? I've answered the problem below for inches since that makes more sense for a pool. Volume of pool = area of pool * depth V = pi*r^2 * depth = 3.14*7.5*7.5*3.5 = 618 cubic feet The volume of 1 gallon of water = 0.133680556 cubic feet. Therefore, the # of gallons of water in the pool = 618/0.133680556 = 4623 gallons of water In actually, because of significant digits in the depth and diameter of pool, the answer would be approximately 4600 gallons of water
What metric unit would be used to measure a water in lake?
Volume is the metric unit used to measure water in a lake. The common metric units for measuring volume include liters (L) and cubic meters (m^3). These units are used to quantify the amount of water present in a given space, such as a lake, by measuring the three-dimensional space it occupies.
How many gallons of water would it take to cover an acre of ground 6 inches deep?
Around 162,926
How many gallons of water lay on a acre of land one inch deep?
There are 27,154 gallons of water in one acre of land that is one inch deep.
How many gallons of water could be in an acre?
1 acre = 43560 sq.feet. 1 foot deep water over an acre is 43560 cubic feet, which is 325851.4 gallons in 1 foot deep. If it is 1 inch deep (1/12 foot) then it is 27154.3 gallons in 1 inch deep.
How many gallons of water are in half an acre?
It depends on the depth of the water. Assuming the water in one inch deep, there would be about 13,577 gallons of water in the half acre.
How many gallons of water does a 1000 acre lake that is 7 feet deep hold?
A 1000 acre lake that is 7 feet deep (uniformly) will have 7000 acre feet of water in it. An acre foot is an acre of water one foot deep, and the unit is used to measure reservoir water capacity. The conversion factor is that one acre foot equals about 325,851.5 gallons. The lake in question is holding 7000 times 325,851.5 gallons of water.
How many gallons of water are in your 1 acre pond that is 10 feet deep?
1 acre is 6,272,640 square inches. Since you want to cover it one inch deep you need 6,272,640 cubic inches of water. There are 231 cubic inches in a gallon. So divide 6,272,640 by 231 and you get 27,154.2857 gallons! HOWEVER: If you want to save water, consider this: When water freezes, it increases in volume about 9%. So if you used ICE to cover your acre and only needed the ice to be 1 inch deep, you could use 9% less water to start with! (I'll let you do the math on that.) Ice is still water, so unless you are asked to use LIQUID water this question has 2 answers.
How many gallons of water are in a 30 acre lake?
The answer will depend on how deep the lake is!
How many gallons of water does a 5 acre lake that is 4 feet deep hold?
Approximately 8,146,286 gallons of water.
How much is an acre foot of water?
1 acre = 43,560 square feet1 cubic foot = 7.4805 gallonsVolume = (surface area) x (depth) = (43,560) x ( 1 ) = 43,560 cubic feet = 325,851 gallons (rounded)
How many gallons of water are in 1 acre pond 6 feet deep?
If the pond is uniformly 6-feet deep it would contain about 1,955,109 gallons of water.
How many gallons does a half acre pond hold that is 3 feet deep?
Approximately 977,553 gallons of water.
How many gallons of water does a 5 acre pond hold that averages 30' deep?
Approximately 48,878,000 gallons.
