24 miles
The surface area of a circular based prism is (2pi x radius squared) + (2pi x radius x height)
The radius is the distance between the centre of a circular arc and a point on the arc.
volume of a regular right circular cylinder is V=pi(r2)h since the radius is (a) then the height of the circular cylinder would be (2a) so the volume of the largest possible right circular cylinder is... V=2(pi)(r2)(a) with (pi) being 3.14159 with (r) being the radius of the circle on the top and bottom of the cylinder with (a) being the radius of the sphere
Area of circular pond: pi times radius squared
The diameter is twice the length of radius, so it is 28 feet.
Area, A, of a circle: A = (pi)r^2 r^2 = A/pi r = √(A/pi) r = √(1808.64/pi) r ≈ 23.9939 miles * so i would round it up and it would be 24miles * You can round the answer up to 24, but a radius 24 is not so close to the area which is 1808.64. Check: (pi)24^2 ≈ 1809.56, and (pi)23.9939^2 ≈ 1808.64
Radius is 7.0 KM
The radius of a cylinder is half the thickness of its circular cross section.
9
The surface area of a circular based prism is (2pi x radius squared) + (2pi x radius x height)
The radius is the distance between the centre of a circular arc and a point on the arc.
Radius is a sensible measure to use with a circular (or spherical) shape. England is neither.
pi radius squared. (radius squared, then multiply by pi.)
Curve linear is antonym to linear. Circular is one among many curvelinear motions. In case of circular there will be a constant radius but in curvelinear radius would change at every instant
The answer will depend on what measure is required: length of a side, perimeter, radius or diameter (if circular), eccentricity (if an ellipse), area.The answer will depend on what measure is required: length of a side, perimeter, radius or diameter (if circular), eccentricity (if an ellipse), area.The answer will depend on what measure is required: length of a side, perimeter, radius or diameter (if circular), eccentricity (if an ellipse), area.The answer will depend on what measure is required: length of a side, perimeter, radius or diameter (if circular), eccentricity (if an ellipse), area.
There is no such thing as a "circular radius", and (pi) is just a number. With thosefacts in mind, the question is only slightly harder to grasp than smoke is, and itclearly has no answer.
The volume of a right circular cone with a radius of 4mm and a height of 6mm equals 140.88mm3