No. An inclinometer only measures vertical angle with respect to gravity. A theodolite adds measurement of horizontal angle to that measurement.
A theodolite is an instrument that is used in archaeoastronomy. To change the face for taking angle measurements when using a theodolite you must turn the telescope by 180 degrees.
Face left observation(In theodolite survey):If the face of the vertical circle is to the left of the observer, the observation of the angle is known as Face left observationFace Right observation(In theodolite survey):If the face of the vertical circle is to te right of the observer, the observation of the angle is known as Face right observation
It is read off the azimuth scale, possibly magnified with a so-called microscope. say, 32 degrees, ll minutes. finer degrees of reading-out are possible with some types. This type of theodolite operation is not too different in principle than taking bearings on objects with a magnetic compass, and reading off the direction in degrees.
the answer is homologous
Same shapes, probably.
Protractor, Inclinometer (often shortened to Clinometer), Theodolite. You could also add Compass and Sine Bar (though the latter really sets rather than measures an angle).
Father of Theodolite
Transit and non-transit theodolite.
advantage and disadvantage of theodolite
Theodolite light is the correct spelling
principle of theodolite is based on the principle of trigonometry.
least count of theodolite is 1 second
5 mm is the least count of theodolite.
A theodolite measures angles and axis needed for site surveying. The horizontal and vertical angles are measured using a theodolite. A theodolite is actually a mounted telescope used in building.
A theodolite that shows a digital rather than analogue display.
theodolite is a surveying instrument.It is is used for measure the horizontal & vertical angles also.parts of theodolite trivet,upper plate lower plate,plomb bob,telescope,vernierscale,leveling screw,tribrach,etc.,
theodolite are use in construction calculate the angle and horizantal distance and for fixed the point