None, since there can be no conversion.
A foot is a measure of length in 1-dimensional space while a square foot is a measure of area in 2-dimensional space. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.
You can not get a precise answer as many width / height measurements could multiply to 550. However the square root of 550 is 23.45207879911715.
I believe there are 550 square yards to a canal, so that makes 8.8 canals / acre, but my brother-in-law says there are 26 canals / acre, which does not tie in. {| |- | 1 canal = 550 sq. yds = 4,950 sq. ft. there are 0.3048 ft / metre = 0.0929 sq. ft/m2 so 1 canal = 460 m2 1 hectare = 10,000 m2 so there are 22 canals / hectare there are 0.4047 acres / hectare so there are 8.8 canals / acre |} I believe there are 550 square yards to a canal, so that makes 8.8 canals / acre, but my brother-in-law says there are 26 canals / acre, which does not tie in. {| |- | 1 canal = 550 sq. yds = 4,950 sq. ft. there are 0.3048 ft / metre = 0.0929 sq. ft/m2 so 1 canal = 460 m2 1 hectare = 10,000 m2 so there are 22 canals / hectare there are 0.4047 acres / hectare so there are 8.8 canals / acre |}
A=Pirh 550cm = Pi (r) 24cm 550/ Pi (24) = r r = 7.3 cm V= 1/3 Pi r^2 h V= 1/3 Pi (7.3)^2 (24) V= 1339.32cm^3
usually it depends on where you are going if you are going to France from England the aircraft should travel approximately at 500/550 mph. if you are on a longer flight from England to Australia usually 600 mph. An interesting addition to this question is how slow can a plane go? RAAF pilots at their airforce base in South Australia can land planes while flying backwards. Into a strong headwind the plane can be kept airborn and can be landed while moving backwards.
The volume, v, of a cone is 1/3*pi*r2*h so r2 = 3*v/(pi*h) = 3*1232/(pi*24) = 154/pi then r = 7.0014. Area of curved surface = pi*r*(r2+h2)0.5 = pi*7.0014*(154/pi+576)0.5 = pi*7.0014*25.0004 = 549.9 sq cm The calculations become much simpler if you use the approximation pi = 22/7 r2 = 154/pi = 154/(22/7) = 154*7/22 = 49 so that r = 7 Then, r2+h2 = 49+242 = 252 So area = pi*7*25 = (22/7)*7*25 = 22*25 = 550 sq cm
550 m2 equates to about 5,920.2 (5,920.15073) square feet.
Answer: 550 acres = 23,958,000 square feet.
550 feet
25 x 22 = 550 square feet.
550
Total square yards: 61.11
You can not get a precise answer as many width / height measurements could multiply to 550. However the square root of 550 is 23.45207879911715.
Roughly 550.
25x22=550 You would need 550 square feet of linoleum.
Linear yards and yards are the same measurement. Therefore, 550 linear yards is equal to 550 yards.
To find the square footage of a rectangle, you multiply the length by the width. In this case, the area would be 25 feet x 22 feet = 550 square feet.
1 square foot = 0.093 square metersThus 550 square feet equal 51.1 square meters