0
What else can I help you with?
What tool is used to measure curved surfaces?
Tape measure
What is the maximum span of a 2x6 at 16 on center?
The maximum span for a 2x6 lumber member used as floor joists, spaced 16 inches on center, is typically around 9 feet for residential applications, depending on the load conditions and wood species. For ceiling joists, the span can be slightly longer, usually up to 10 feet. It's important to consult local building codes and a structural engineer for specific requirements and safety factors.
What is the difference between airfoil profile and airfoil section?
The difference between airfoil and airfoil section is that airfoil is a structure with curved surfaces designed to give the most favorable ratio of lift to drag in a flight, it is used as the basic form of wings, fins, and tailplanes of most aircraft. An airfoil section is the cross- sectional shape or profile of an airfoil. I studied that in sixth grade for a model plane that I did a report on. Researching into things that aren't required can help put you farther into life's riches. Hope I helped.
What is the Curved line connecting 2 or more notes of different pitches?
The curved line connecting two or more notes of different pitches is called a slur in music notation. A slur indicates that the notes should be played smoothly and connected without any separation between them. It is different from a tie, which connects two notes of the same pitch to extend their duration. Slurs are commonly used in piano, vocal, and string music to indicate phrasing and articulation.
Square meters in one ton of structural steel?
It is roughly 7.6m2 per ton of steel structure material. This can be used for approximate calculation.
What is a curve in bridges or over doorways?
The curve that is used in bridges and over doorways is an arch. An arch is the curved part that is over an opening and it helps support the weight above the opening.
What is a barrel roof?
A barrel roof is a roof with a curved, semi-circular cross section, used to span large distances, such as found in railway stations and churches.
What is a barrel vault?
A barrel vault is a simple roof with a curved, semi-circular cross section, used to span large distances, such as found in railway stations and churches.
What is barrel vaulting?
A barrel vault is a simple roof with a curved, semi-circular cross section, used to span large distances, such as found in railway stations and churches.
What is the meaning of wind span and weight span?
When looking at the transmission line profile view, the wind span is defined as half of the sum of adjacent spans. The weight span is defined as the distance from low point sag of one span to the low point sag of the next span. To clarify, these values have to do with loading of a supporting structure (transmission line pole structure). with 3 structures in a row, there are 2 cable spans. One half of the sum of the 2 spans will give the wind span. This will be used to calculate the force applied to the structure due to a horizontal wind blowing on the conductors. Because the cable takes the form of a catenary curve when hung between 2 fixed points, there will be a low point between each of the structures. The distance between these low points will be the weight span for the middle structure. This value will be used to calculate the weight of the cable that the structure must support.
Which is the strongest bridge structure - truss cantilever suspension or arch?
The arch is the strongest structure. The reason the others are sometimes used is the span is so long the arch isn't practicle.
What is a curved structure that supports the weight of walls and roofs?
It's actually called a(n) Vault . A Vault is a curved ceiling if that's what you meant!.! YO WELCOME! YO NEED 2 START SAYIN' THANK YUR ! UGGGHHH KEEP IT REAL BOO
What is the difference between a beaker and a flask?
A beaker has a cylindrical shape with a spout for pouring, and is primarily used for stirring, mixing, and heating liquids. A flask typically has a narrow neck and is used for containing and storing liquids without significant evaporation or contamination. Flasks are usually more specialized and precise in their applications compared to beakers.
What is the purpose of jack studs in framing a door or window opening?
Jack studs are used in framing a door or window opening to provide support and stability to the header above the opening. They help distribute the weight of the structure and ensure that the opening remains structurally sound.
What does the k in K-span building stand for?
The "k" in K-span building refers to the "k" in "K-span," which stands for "K" as a designator for a specific type of structural system. K-span buildings are characterized by their curved, arch-like structures that provide strength and durability, often used in industrial and agricultural applications. The design allows for large, unobstructed interior spaces, making them ideal for warehouses, storage facilities, and similar uses.
Can hacksaws be used to cu curved edges?
No, it can't, for curved edges you use a piercing saw!
Can spic and span be used as a drug?
No, Spic 'n Span is a cleaning product. It cannot be used as a drug. It can be used to wash floors.
