0
What else can I help you with?
What diameter is a Y12 bar?
12mm
How many pieces of 12mm re bar is in 1 ton?
Mass per Meter Run in Kg
How many 12mm bars by 6m in one ton?
Take steel density at 7.85 g / cu. cm. One bar = pi * 0.62 * 600 * 7.85 = 5327 grams / bar = 5.327 kg / bar 1 short ton (2000 pounds) = 907.18 kg, so 907.18 / 5.327 = 170.3 bars 1 long ton (2240 pounds) = 1016 kg, so 1016 / 5.327 = 190.73 bars 1 metric tonne = 1000 kg, so 1000 / 5.327 = 187.72 bars
How many no of 6mm tore bar in one tone?
how many steel bar in one ton
How many parts are in the fraction bar?
12 parts are in a fraction bar
What is the weight of one 25 mm diameter bar bundle?
It depends on what material and how many there are in the bundle.
What diameter is a Y12 bar?
12mm
How many pieces of 12mm re bar is in 1 ton?
Mass per Meter Run in Kg
What is the density of 12mm deformed bar?
7850kg/m3
What is a y12 reinforce steel bar?
It is a deformed round steel bar and has a diameter of 12mm.
How many steel bars of 12mm are in one ton?
170 Y12 Bar to the ton at 6000 M long
How many grease fittings 1996 Dodge Ram 3500 diesel?
Depends on how many steering components are original. Check ball joints, tie rods, track bar, drag links, and u jointsDepends on how many steering components are original. Check ball joints, tie rods, track bar, drag links, and u joints
How many grease fittings are there on a 1996 dodge 1500 truck?
Depends on how many steering components are original. Check ball joints, tie rods, trac bar, drag links, and u joints.Depends on how many steering components are original. Check ball joints, tie rods, trac bar, drag links, and u joints.
How piece of iron bar of 12mm make one metric tone?
To calculate the weight of an iron bar, you need to know its length. Assuming a standard density of iron, the weight of a 12mm iron bar to be one metric ton would require a length of approximately 82.5 meters. This calculation is based on the volume of the iron bar and its density.
Where are the grease fitting on a 2000 dodge ram 1500?
Check tie rods, ball joints, trac bar, and u-joints.Check tie rods, ball joints, trac bar, and u-joints.
What are the release dates for The Corner Bar - 1972 Bonnie's Bundle 1-6?
The Corner Bar - 1972 Bonnie's Bundle 1-6 was released on: USA: 26 July 1972
What are the elements of bar grating?
Bar grating consists of bearing bars and cross rods. The bearing bars carry or "bear" the weight. The cross rods hold the bearing bars together. The cross rods can be welded, press locked, or swaged.
