12mm
5X = Y12 ???? If so...., Y12 = 5X Y = 12th root(5X) ===============
(bar) AC
caliper. Micrometer
Nominal diameter of deformed bars are specified by standards.Diameter of deformed bar is controlled from test :1. measure the mass w in kg weighted to a precision 0.5 %2. measure the length L in m to a precision 0.5 %The equivalent diameter is nominal diameter of deformed bars and calcolation is by this formula :Diamater = root square of ( 162.13 w / L )
The tool used for checking the external diameter of a round bar is called a caliper, specifically a digital or dial caliper. These calipers can accurately measure the diameter by using their jaws to grasp the round bar at its widest point. Alternatively, a micrometer can also be used for more precise measurements, particularly for smaller diameters. Both tools are essential for ensuring that the round bar meets specified dimensions in manufacturing and engineering applications.
It is a deformed round steel bar and has a diameter of 12mm.
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
A Y12 bar typically has a cross-sectional area of 113 square millimeters.
785okg/m3
To determine how many Y12 bars can replace a Y16 bar in a column, you need to consider the area of steel provided by each bar. The area of a Y16 bar is approximately 201 mm², while a Y12 bar has an area of about 113 mm². Therefore, to replace one Y16 bar, you would need about 201/113 ≈ 1.78, meaning you would need at least 2 Y12 bars to provide a similar cross-sectional area of steel.
0.887 kg per m
In the context of concrete reinforcement steel, a Y12 bar refers to a deformed steel bar with a diameter of 12 millimeters. The "Y" indicates that it is a high-strength deformed steel bar. On the other hand, an R10 bar refers to a round steel bar with a diameter of 10 millimeters. The "R" signifies that it is a mild steel bar without any deformations.
There are 907,185.01 y12 in a ton.
170 Y12 Bar to the ton at 6000 M long
5X = Y12 ???? If so...., Y12 = 5X Y = 12th root(5X) ===============
Japan domestic Nissan Y12 wingroad bolt pattern is 4 * 100mm
If this is an equation you left out the equal sign. Do you mean y8=y12-4. If so add 4 to both sides. You have 4+y8=y12. Then substract y8 from both sides. You have 4=y4. Divide both sides by 4. You have y=1.