Go to the Weighing Machine and calculate it...................Stupiddd
360 degrees in a circle 120 degrees = 12mm 360 degrees = 36mm Therefore the circumference of the circle is 36mm.
The volume of the plate is (0.5 x 20 x 45) = 450 cubic inchesThe weight is (450) x (0.28) = 126 pounds
how to calculate the elbow radius or elbow length
Record how long they are first.
howl long does it take to calculate a ofenders projected release date
ABOUT 5-12CM AND 12MM WIDE.
12mm is about 0.0394 feet.
The weights of steel rods with diameters of 8mm, 10mm, 12mm, 16mm, and 20mm will vary based on the specific material used. As an example, the weight of a 1-meter long mild steel rod with a diameter of 8mm would be approximately 0.39 kg, 0.62 kg for 10mm, 0.89 kg for 12mm, 1.58 kg for 16mm, and 2.47 kg for 20mm. These are approximate values and can vary depending on the exact composition of the steel.
300 sq mm
It always depends, but most of them are around 8-12mm.
360 degrees in a circle 120 degrees = 12mm 360 degrees = 36mm Therefore the circumference of the circle is 36mm.
The volume of the plate is (0.5 x 20 x 45) = 450 cubic inchesThe weight is (450) x (0.28) = 126 pounds
No, "plate" is not a long vowel word. The "a" in "plate" is a short vowel sound.
170 Y12 Bar to the ton at 6000 M long
without specifying the force its not possible to find the torque.
No, the word "plate" does not have a long vowel sound. The "a" in plate is pronounced with a short vowel sound, like in "cat" or "hat."
TOO long, that is why you should use paper or re-use a glass plate