Q: Covert inches of water to psi?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

Multiply inches of WC by 0.0361 to obtain PSI.

Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column

One psi (pounds per square inch) is 27.7 inches of water. An inch of water is a unit of pressure which will raise water one inch. A cubic inch of water weighs 0.0361 pounds, so one psi is one over 0.0361 or 27.7 inches of water.

.4 psi

You need to multiply by 0.036. So 5 x 0.036=.18 psi

Related questions

35 inches of water is equivalent to approximately 1.27 psi. This can be calculated by dividing the height of the water column (35 inches) by the conversion factor (27.71 inches of water column per psi).

There are 46.15 inches of water in a 20 psi pressure. This can be calculated using the formula: 1 psi = 2.307 feet of water, which is approximately 27.69 inches. 20 psi x 27.69 inches/psi = 46.15 inches.

Multiply inches of WC by 0.0361 to obtain PSI.

Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column

27.7 inches

27.71 inches of water column equals 1 psi

One psi (pounds per square inch) is 27.7 inches of water. An inch of water is a unit of pressure which will raise water one inch. A cubic inch of water weighs 0.0361 pounds, so one psi is one over 0.0361 or 27.7 inches of water.

1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.

0.25 psig = 413.7 inches of water column

Inches of mercury x 0.4912 = psi

1 psi (pound per square inch) is equivalent to 27.7 inches of water column. Therefore, 6 inches of water column is approximately 0.216 psi. To convert psi to ounces per square inch, we can use the conversion factor: 1 psi = 2.036 oz/in^2. Therefore, 6 inches of water column is equivalent to approximately 0.44 oz/in^2.

.4 psi