Final Velocity minus Initial Velocity (all together this is the change in velocity) divided by the average acceleration will give you the time it took for the object to reach that speed.(Vf - Vi) / Aaverage = Time
Generally wind speed is measured using a cup anemometer (wind speed measuring device). The velocity of a flatulation will decrease as it leaves the anus, so to properly measure the velocity the measurement would have to be done before the exit. Theoretically you could measure the velocity of the gases by placing a miniature cup anemometer with walls inside the rectal tract close to the anus to give an approximate wind speed (velocity) of the gases.
If I walk 4 kilometers in an hour, my average speed during that hour was 4 km/hour. My instantaneous speed may well have been faster at times, and slower at other times, 4 km/hour is only the average.
If you know average speed then you cannot determine the acceleration: the very nature of being a average hides all the increases and decreases in speed which are the accelerations (technically, acceleration is change of speed in a direction). All average speed tells you is the constant speed at which you require to travel to cover the given distance in the given time; as the speed is constant, the acceleration is zero.
Frequency = (speed)/(wavelength) = 12/2 = 6 per second = 6 Hz.Note:The question doesn't give enough information to describe the velocity. "12" is nota velocity, but it can be a speed, and we've assumed that it is. Fortunately, 'speed'is all we need to answer the question.
Instantaneous speed is your speed in a given moment. The speedometer in your car and the radar gun that cops use both give a value in instantaneous speed. The disctinction here is to not confuse instantaneous speed with average speed, which is calculated over a set distance. To calculate average speed (V) you need to divide the distance travelled (D) by the time of travel (T). V= D/T
Instantaneous speed is your speed in a given moment. The speedometer in your car and the radar gun that cops use both give a value in instantaneous speed. The disctinction here is to not confuse instantaneous speed with average speed, which is calculated over a set distance. To calculate average speed (V) you need to divide the distance travelled (D) by the time of travel (T). V= D/T
Dividing change of velocity by the time it takes to change the velocity. If acceleration is not constant, this will give you the average acceleration during the period; to get the instantaneous acceleration, you have to take the derivative of the velocity.
No. The speed can be consant but direction can change and thus the velocity changes.
You do not know an object's velocity until you know both its speed and direction (vector quantity). Knowing only the speed would give you its magnitude but not its direction, which is required to determine velocity.
To find instantaneous velocity from a position-time graph, you calculate the slope of the tangent line at a specific point on the graph. The slope represents the rate of change of position at that instant, which is equivalent to the velocity at that particular moment.
In a car, the speedometer measured Instantaneous speed. This comes from the assumption that the car does not slow down and speed up fast enough for the speedometer to be able to give an average of the changing speed.
Speed is a crucial component of velocity because it represents the rate at which an object is moving in a certain direction. Velocity, on the other hand, not only includes the speed of the object but also the direction in which it is moving. Thus, knowing the speed is essential to calculate the velocity accurately.
The two factors that determine velocity are speed and direction. Speed refers to how fast an object is moving, while direction specifies the path it is following. Combined, speed and direction give us the overall velocity of an object.
The slope of a distance-time graph represents the speed or velocity of an object. A steeper slope indicates a faster speed, while a shallower slope indicates a slower speed.
Final Velocity minus Initial Velocity (all together this is the change in velocity) divided by the average acceleration will give you the time it took for the object to reach that speed.(Vf - Vi) / Aaverage = Time
No. It's called the 'speed' of the body. It's the size of the velocity, but it's not complete informationabout the velocity. If you also give the direction of the displacement, then that information, alongwith the speed, defines the velocity.