Want this question answered?
IF YOUR TABLE IS 108" LONG " TOTAL LENGHT THEN I WOULD SAY 4 THAT GIVES 24" PER PERSON, BUT IF THATS JUST ONE SIDE THEN YOU CAN SIT 10. i SAY TEN BECAUSE THE TABLE MAY BE 108" LONG BUT IT HAS TO HAVE 2 ENDS WHICH WOULD SEAT ONE AT EACH END FOR A TOTAL OF 10. If it's a round table then you can seat 5 ricky " THE STICK OUTDOORS " AND GARDENING EXTRADINARE
If you want an example: 10 people for each table for every two restaurants. It cannot be simplified any more, if that's what you're asking.
Length of the table is 10 feet.
Common elevators may have a capacity of 10 or even 11 people(though it also depends on how big those people are!)
A multiple of a number is in that number's times table. For example, a multiple of 10 will be in the 10 times table. 30 = 10x3 40 = 10x4 Therefore, 30 and 40 are multiples of 10
A conference table that will hold 10 people is pretty big. This type of table would have to be at least 72 inches. For other measurements, here is a link: http://www.banquettables.pro/index.php?Itemid=112
For banquets, a 6 ft (72inch) round table is typically used to seat 10 people comfortably
8 to 10. You can seat 4 on each side of the table lengthwise and you might be able to seat one more at each end for 10 total.
10 but 1 if they are fat
It depends on the shape of the table. A square table about 6' on each side would easily seat 10, 5' would be possible but probably not comfortably. A round 8' diameter table would work. A banquet table 2.5 X 10 will seat 10 with 4 on each side and one on each end.
He with either have 38 tables with 4 people at each table, or 19 tables with 8 at each table.
10 inches from table underside to top of chair seat
You can sit 8 people at an 8 ft table. 4 on each side. Or if you use the ends you can seat 10.
When planning how many people you are able to seat at a round table, the following are event industry standards: 30" table=2-4 people 36" table=4-5 people 48" table=6-8 people 54" table=8-9 people 60" table=8-10 people 66" table=9-11 people 72" table=10-12 people If you'd like to be more specific, or are using nonstandard sized tables, a good rule of thumb is to allow 18-24 inches of linear space per person. Based on the number of people you are seating at the table, calculate the total amount of linear inches you'll need per table, then divide that number by Pi (3.14) to figure the diameter of the table you will need. For example, here is the calculation for the size of a round table for 10 people: 10 guests x 21 inches per guest = 210 total linear inches 210 total linear inches / 3.14 = 66.88 inches in diameter Based on this calculation, you will need a table that is at least 66.88 inches in diameter to seat 10 people, allowing 21 inches for each seat. For an accurate estimate, be sure to consider are the width of the chairs you'll be using. Metal folding chairs are typically 17-19 inches wide, while rental ballroom chairs are only 16.3 inches wide. Another consideration is the place setting you'll be using at each seat. If it is an elaborate place setting with a charger and multiple pieces of flatware, then calculate the space needed per person accordingly.
"The size dinning room you would wan't is hard to figure out." " You would haft to have a very large dinning room I know that." "I am sorry I could not answer your question that well,but that's all I know"
For a wedding of 100 people, there should be at least 10 tables, assuming each table can seat 10 people. Usually, assume the each table can only be used around 7-8 people to avoid running out of seats.
Assuming each person needs about 24 inches of width, a table 30 X 72 inches can comfortably seat around 8-10 people.