Wiki User
∙ 13y agoIf you know the radius place the compass point on a ruler and the pencil end the radius distance away from it. Then put the point on the paper and spin to draw the circle.
If you know the diameter divide by two to get the radius and place the compass point on a ruler and the pencil end the radius distance away from it. Then put the point on the paper and spin to draw the circle.
Wiki User
∙ 13y agoConstruct a circle with a compass and then draw a straight line through its centre
draw an arc 7/10 of the diameter after you draw a circle
You can draw a circle in assembly program by using a compass-like tool. Secure the tip of the compass and then rotate the compass tool so that it completes the circle.
A circle
With a compass
Construct a circle with a compass and then draw a straight line through its centre
draw an arc 7/10 of the diameter after you draw a circle
A compass can be used to calculate distance by angle and to help draw circles as well as finding the radius, diameter, and circumference of the circle.
First draw a circle using a compass. Now, use a piece of string to help measure the circumference of the circle. Now measure the diameter of the circle. To discover Pi divide the circumference by the diameter.
You can draw a circle in assembly program by using a compass-like tool. Secure the tip of the compass and then rotate the compass tool so that it completes the circle.
Short instructions:Construct the diameter of the circle at the tangent point Construct a line at right angles to the diameter at the tangent point. this is a tangent to the circle at that point.Detailed instructions with compass and straight edge:Given: circle C with a point T on the circumference Sought: Tangent to C at TFind the center circle CPlace the needle of the compass on the (circumference of) circle C (anywhere), draw a circle [circle 1] (I think circle 1 has to be smaller than twice the diameter of circle C).Without changing the compass size, place the needle of the compass on the intersection of circles C and circle 1, draw a circle (circle 2)Without changing the compass size, place the needle of the compass on the other intersection of circles C and circle 1, draw a circle (circle 3)Connect the intersections of circle 1 and circle 2 (one is outside and one inside circle A) this we call [ line 1]Connect the intersections of circle 2 and circle 3 (also here one is outside and one inside C) [line 2]The intersection of line 1 and Line 2 is [O]. This is the center of circle CDraw a line [line 3] from [O] through [T] and beyondConstruct the diameter of the circle at [T] (the point for the tangent) and extend it beyond the circumference of circle C With your compass needle at [T] mark off equal distances on [line 3] inside and outside circle C. We call these points [4] & [5]Increase the compass size somewhat and with the needle at [4] draw a circle [circle 4]Without changing the compass draw [circle 5] centered on [5]Construct a line perpendicular to line 3 at [T]The line through the intersections of circle 4 and circle 5 is the sought tangent at [T]Note: although the instructions say "draw a circle" often it is sufficient to just mark a short arc of the circle at the appropriate place. This will keep the drawing cleaner and easier to interpret.
A circle
With a compass
To draw a circle with a compass, first set the distance between the point and the pencil of the compass using a ruler. This distance is the radius. Now, place the point on the paper where you want the center of the circle. Spin the compass around the point, lightly dragging the pencil on the paper, and you will have a circle.
compass
A compass
Yes, you can draw a circle with a diameter of 6 cm.