# is the ratio of the demensions in the drawing to the corresponding actual dimensions. The scale factor for a scale drawing is the ratio of the dimensions in the drawing to the corresponding acual bimensions.
Are u findanswers
28 ft. by 36 ft. Assuming the scale is 12 inches (drawing) = 2 ft (room). For every one foot in the drawing, you get two feet of room. Room then is 28 ft. by 36 ft. in a 14 X 18 drawing.
New perimeter = old perimeter*scale factor New area = Old area*scale factor2
If you know how to find the area of a triangle do the same thing and you will get the same answer.
# is the ratio of the demensions in the drawing to the corresponding actual dimensions. The scale factor for a scale drawing is the ratio of the dimensions in the drawing to the corresponding acual bimensions.
Are u findanswers
on the bill of materials
1:786
The scale factor M is used to convert the measurements on the scale to the actual distances. By multiplying the measurement on the scale by the scale factor M, you can find the true distance in meters. This allows you to accurately measure distances using a scaled-down representation on the map or drawing.
To find the scale factor, divide the corresponding dimensions on the scale drawing by the actual dimensions. For the length, 40 ft is equal to 480 in, so the scale factor is 16 in / 480 in = 1/30. For the width, 28 ft 9 in is equal to 345 in, so the scale factor is 11.5 in / 345 in = 1/30. María used a scale factor of 1/30 in her drawing.
1km=5cm
28 ft. by 36 ft. Assuming the scale is 12 inches (drawing) = 2 ft (room). For every one foot in the drawing, you get two feet of room. Room then is 28 ft. by 36 ft. in a 14 X 18 drawing.
As you would find the surface area of a normal shape using scale factors: to find the volume scale factor cubed, therefore to find the surface area of the hypercube, you do the scale factor to the power of four. geoffrz450@yahoo.co.uk
New perimeter = old perimeter*scale factor New area = Old area*scale factor2
subtract the weight that the scale reads by 10
measure something in the drawing/model and measure a similar thing in real life. now divide the smaller measurement into the bigger measurement, that's the scale. So if in a model a person on street is 2cm then in real life a person is about 2 meters or 200cm so the scale is 1:100.