There is no equivalence. An angle is a measure of rotational displacement. It is formed by two rays (or lines) and does not create an enclosed space. An area is a measure of an enclosed space.
Simply work out the area of a section of cable.........
by calculating I=1/12bh3
Imagine the wire is straight, now cut through at right angle to the centre line, the exposed surface is the cross sectional area, on a round wire it = pi * radius2 (area of a circle)
Oh, dude, calculating the cross-sectional area of a cube is like a walk in the park. You just take the length of one side of the cube and square it. So if the side of the cube is 4 units long, the cross-sectional area would be 16 square units. Easy peasy, right?
Perimeter of the base of the ruler multiplied by its height
To calculate the cross sectional area of a rectangular tube, multiply the widths of two adjacent sides of the tube.
reduction ratio= initial cross sectional area/final cross sectional area
To calculate the cross-sectional area of a shape, you need to determine the shape of the cross-section first (e.g., square, circle, triangle). Then, use the appropriate formula for that shape. For example, the formula for the cross-sectional area of a square is side length squared, for a circle it is pi times the radius squared, and for a triangle it is base times height divided by 2. Finally, plug in the given dimensions into the formula to calculate the cross-sectional area.
To calculate the weight of an ISA 50x50x6mm angle, you can use the formula: Weight = Area x Length x Density. First, calculate the cross-sectional area of the angle (50x6 = 300 square mm), then convert it to square meters. Multiply the area by the length of the angle in meters and the density of the material (e.g., mild steel density is approximately 7850 kg/m^3) to determine the weight in kilograms.
Simply work out the area of a section of cable.........
by calculating I=1/12bh3
To calculate velocity in a pipe, you can use the formula: velocity flow rate / cross-sectional area of the pipe. The flow rate is the volume of fluid passing through the pipe per unit time, and the cross-sectional area is the area of the pipe's opening. By dividing the flow rate by the cross-sectional area, you can determine the velocity of the fluid moving through the pipe.
Imagine the wire is straight, now cut through at right angle to the centre line, the exposed surface is the cross sectional area, on a round wire it = pi * radius2 (area of a circle)
Oh, dude, calculating the cross-sectional area of a cube is like a walk in the park. You just take the length of one side of the cube and square it. So if the side of the cube is 4 units long, the cross-sectional area would be 16 square units. Easy peasy, right?
measure the channel height and then width and multiply them together
Perimeter of the base of the ruler multiplied by its height
Volume = Cross sectional Area x Height.