all you have to do is convert it..........
It is not possible. Radians are a measure of angular displacement while rpm is a measure of the rate of change of angular displacement. The question is like asking to convert speed into distance.
http://www.piercenet.com/files/TR0040-Centrifuge-speed.pdf
Converting cubic centimeters (cc) to horsepower is not a direct conversion as they are units measuring different things. Cubic centimeters measure volume, while horsepower measures power. However, you can calculate the horsepower of an engine if you know its torque and rotational speed using the formula: Horsepower = (Torque x RPM) / 5252. So, without additional information, it is not possible to directly convert 1200 cc to horsepower.
First, Torque = 1.5 meter x 3.5 (cubic meter)x 1000 (litres/cubic meter) x 1 (kg/litre) = 5250 kg. meter Horse Power = Torque x rpm / 5252 = 5250 x 60 /5252 = 59.97 First, Torque = 1.5 meter x 3.5 (cubic meter)x 1000 (litres/cubic meter) x 1 (kg/litre) = 5250 kg. meter Horse Power = Torque x rpm / 5252 = 5250 x 60 /5252 = 59.97
1 rpm = 1*1/min 0r 1min^-1 So, 10000 min^-1 =10000rpm
It depends on how fast the engine is going (RPM). Displacement X RPM = Volume/minute.
A 7200 RPM hdd spins at 7200 RPM, 10000 RPM spins at (you guessed it) 10000 RPM. A 10000 RPM HDD should transfer data faster than a 7200, and apart from the WD "Raptor" series most 10000 RPM HDDs are high end SCSI (Small Computer System Interface) drives, and as such are built to a higher standard than IDE (Internal Drive Electronics) or SATA (Serial AT Attachment) drives.
Common current values are 5400 rpm, 7200 rpm, and 10000 rpm. However, these are not the only possible values.
all you have to do is convert it..........
Airconditiong and heating pwer are rated in BTU's not RPM's this unit is 10000 BTU's
1500g
You cannot, the terms are incompatable.
Most alternators are designed to run between 2000 to 10000 rpm.
That depends, is a a 520 SATA for a notebook or Desktop. Most notebooks have a 5400 RPM, though you can purchase 7200 RPM drives. Desktops are generally 7200, but can go to 10000 RPM. SCSI drives, which 520 isn't usually, can also go to 15000 RPM.
It is not possible. Radians are a measure of angular displacement while rpm is a measure of the rate of change of angular displacement. The question is like asking to convert speed into distance.
The capacity of a Maytag MFW9800 is 4.0 cubic feet. This front loading washing machine also has a maximum spin speed of 1200 RPM and has 9 different wash cycles.