Want this question answered?
Be notified when an answer is posted
# is the ratio of the demensions in the drawing to the corresponding actual dimensions. The scale factor for a scale drawing is the ratio of the dimensions in the drawing to the corresponding acual bimensions.
Are u findanswers
28 ft. by 36 ft. Assuming the scale is 12 inches (drawing) = 2 ft (room). For every one foot in the drawing, you get two feet of room. Room then is 28 ft. by 36 ft. in a 14 X 18 drawing.
62.5
well.... first off you have to find the scale factor...
# is the ratio of the demensions in the drawing to the corresponding actual dimensions. The scale factor for a scale drawing is the ratio of the dimensions in the drawing to the corresponding acual bimensions.
The scale factor M is used to convert the measurements on the scale to the actual distances. By multiplying the measurement on the scale by the scale factor M, you can find the true distance in meters. This allows you to accurately measure distances using a scaled-down representation on the map or drawing.
measure something in the drawing/model and measure a similar thing in real life. now divide the smaller measurement into the bigger measurement, that's the scale. So if in a model a person on street is 2cm then in real life a person is about 2 meters or 200cm so the scale is 1:100.
Are u findanswers
To find the actual distance between two points on Earth using a graphic scale, measure the distance between the two points on the map using the scale provided. Convert this measurement to actual distance by using the ratio scale (e.g., 1 cm = 100 km) provided on the map. Multiply the measured distance by the ratio to find the actual distance between the two points on Earth.
Ok sooo you first put the scale number over the actual number then u ( if needed) covert to the same kind of measurement thennn you put the outcome over the scale again and you simplify........
on the bill of materials
1:786
To find the scale factor, divide the corresponding dimensions on the scale drawing by the actual dimensions. For the length, 40 ft is equal to 480 in, so the scale factor is 16 in / 480 in = 1/30. For the width, 28 ft 9 in is equal to 345 in, so the scale factor is 11.5 in / 345 in = 1/30. María used a scale factor of 1/30 in her drawing.
i \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''Nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjbjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
You would need to use a Triple Beam Balance, or you could put it on a scale, and then convert the scale's measurement to grams, which is the measurement of mass.
28 ft. by 36 ft. Assuming the scale is 12 inches (drawing) = 2 ft (room). For every one foot in the drawing, you get two feet of room. Room then is 28 ft. by 36 ft. in a 14 X 18 drawing.