Multiply inches of WC by 0.0361 to obtain PSI.
Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column
.4 psi
50 gallons
You need to multiply by 0.036. So 5 x 0.036=.18 psi
10 inches of water column equals to how much gas pressure?
27.71 inches of water column equals 1 psi
10" Water Column equals about .4 Pounds per Square Inch or 0.36127291827412783psi exactly.
0.5 psig is equivalent to 13.8 inches of water column.
14 inches equals one pound of natural gas pressure
0.25 psig = 413.7 inches of water column
1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.
To convert inches of water column to volume, you would need to know the area over which the water column is acting. Once you have the area, you can calculate the volume by multiplying the inches of water column by the area in square inches. The formula would be: Volume = Inches of water column * Area.
1 psi (pound per square inch) is equivalent to 27.7 inches of water column. Therefore, 6 inches of water column is approximately 0.216 psi. To convert psi to ounces per square inch, we can use the conversion factor: 1 psi = 2.036 oz/in^2. Therefore, 6 inches of water column is equivalent to approximately 0.44 oz/in^2.
35 inches of water is equivalent to approximately 1.27 psi. This can be calculated by dividing the height of the water column (35 inches) by the conversion factor (27.71 inches of water column per psi).
It is 0.000039 inches, approx.
Multiply inches of WC by 0.0361 to obtain PSI.