About 2 1 pound per square inch = 2.0362... inches of mercury
Inches of mercury x 0.4912 = psi
You need to know how high the water column is to calculate the pressure it exerts at its base! For example, a column of water 1 metre deep would exert a pressure of 9.81 kPa at its base (density x gravity x depth - 1000 * 9.81 * 1). This would be equal to approx 1.42 PSI.
Inches of water x 0.03613 equals pounds per square inch (psi).
27.7 "h2o
You need to multiply by 0.036. So 5 x 0.036=.18 psi
35 inches of water is equivalent to approximately 1.27 psi. This can be calculated by dividing the height of the water column (35 inches) by the conversion factor (27.71 inches of water column per psi).
27.71 inches of water column equals 1 psi
Multiply inches of WC by 0.0361 to obtain PSI.
0.25 psig = 413.7 inches of water column
1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.
Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column
1 psi (pound per square inch) is equivalent to 27.7 inches of water column. Therefore, 6 inches of water column is approximately 0.216 psi. To convert psi to ounces per square inch, we can use the conversion factor: 1 psi = 2.036 oz/in^2. Therefore, 6 inches of water column is equivalent to approximately 0.44 oz/in^2.
.4 psi
5 psi is equivalent to 34.47 inches of water column (in wc).
One psi (pounds per square inch) is 27.7 inches of water. An inch of water is a unit of pressure which will raise water one inch. A cubic inch of water weighs 0.0361 pounds, so one psi is one over 0.0361 or 27.7 inches of water.
Inches of water x 0.03613 = psi