answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How many 32nds in 1 inch?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many 32nds are in one inch?

Thirty two of them because 32 times 1/32nds = 1 inch


How many 32ths there in one inch?

There are 32 32nds of an inch in one inch.


How many inches does .909 equal?

The closest you can get is 29/32nds of an inch. Which expressed as a decimal is 0.90625.


What is the minimum tread depth for a bus?

4/32nds of an inch


If an inch equals 25.4 mm how do I determine 1 mm?

If 25.4 mm equal 1 inch, then 1 mm would be about 1/25 of an inch, correct? To put this in perspective to an inch, I'll use the smallest unit I know that is commonly used: 1/32. 32 (to an inch) divided by 25.4 is approximately 1.26/32 of an inch, or about 1 1/4 32nds of an inch.


What is the minimum tire tread for a passager vehicle?

Minimum LEGAL tire tread depth is 2/32nds of an inch.


Most tape measures show 16ths of an inch and less show 32nds of an inch but how often do home renovation specialists use 64th of an inch or higher measurements?

About as often as a hairstylist does.


What is 1.1 inches on a ruler?

It is 1 + 1/10 inches: that is one inch and one additional mark provided those marks are said to be tenths. They may be eighths or sixteenths (or in very accurate rulers, 1/32nds).


Does four thirty seconds of an inch equal one eighth inch?

Yes. Four 32nds (4/32) is the same as one 8th (1/8).


How many inches of thickness is the tread on most off-road mud tires?

Tread is measured in 32nds of an inch, or x/32. Most off-road mud tires measure about 18/32, which is read as "eighteen thirty-seconds of an inch."


How many 32nds are there in three 8ths?

12/32 = 3/8


How far should your needle potrude out of the tip of your tattoo machine?

its 1/16th of an inch if your doing color shading, and 1/32nds of an inch for outlining and 3/32nds i believe for black shading. see with the color ink you have to have your needle sticking out farther than you would for outlining or black shading. On an outline you bareley want your needle to stick out this way it wont be all over the place when you hit the pedal, it'll be pretty set in your tip so there wont be any unnessary moving around.