0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Most tape measures show 16ths of an inch and less show 32nds of an inch but how often do home renovation specialists use 64th of an inch or higher measurements?
About as often as a hairstylist does.
How many 32nds of an inch are in a sixteenth of an inch?
Division of Fractions. 1/16 divide 1/32 = 1/16 X 32/1 = Cancel down by '16' 1/1 X 2/1 = 2/1 = 2 The answer!!!!!
What is half of 13 32nds?
13/64 is. That's 0.203125 .
What do you use to measure something smaller than an inch?
centimetres To measure an object smaller than an inch you can use a ruler. Builders often use rulers to measure things smaller than an inch. Or you can use a vernier caliper to accurately measure small things. If you r are talking about what measurements you use then you use parts of an inch ie 16ths or 8ths or 32nds of an inch. Click on 'related links' below to see a picture of a vernier caliper.
What is 90 per cent of an inch in eighths or sixteenths or 32nds?
None of the above - 90% is nine tenths. However, 9/10 x 8/8 = 72/80 so is 7.2 eighths (7.2 / 8 x 100 = 90) and so on ...
How many 32nds are in one inch?
Thirty two of them because 32 times 1/32nds = 1 inch
How many 32ths there in one inch?
There are 32 32nds of an inch in one inch.
How many 32nd in quarter inch?
There are 32 32nds of an inch in one inch.
How many inches does .909 equal?
The closest you can get is 29/32nds of an inch. Which expressed as a decimal is 0.90625.
What is the minimum tread depth for a bus?
4/32nds of an inch
How many 32nds is 10mm?
1 millimeter is approximately equal to 25.4/32 inches. Therefore, 10 millimeters is equal to 10 × 25.4/32 = 7.9375 thirty-seconds (32nds) of an inch.
What is the minimum tire tread for a passager vehicle?
Minimum LEGAL tire tread depth is 2/32nds of an inch.
Most tape measures show 16ths of an inch and less show 32nds of an inch but how often do home renovation specialists use 64th of an inch or higher measurements?
About as often as a hairstylist does.
How many inches of thickness is the tread on most off-road mud tires?
Tread is measured in 32nds of an inch, or x/32. Most off-road mud tires measure about 18/32, which is read as "eighteen thirty-seconds of an inch."
How many 32nds of an inch are in a sixteenth of an inch?
Division of Fractions. 1/16 divide 1/32 = 1/16 X 32/1 = Cancel down by '16' 1/1 X 2/1 = 2/1 = 2 The answer!!!!!
How many 32nds are there in three 8ths?
12/32 = 3/8
If an inch equals 25.4 mm how do I determine 1 mm?
If 25.4 mm equal 1 inch, then 1 mm would be about 1/25 of an inch, correct? To put this in perspective to an inch, I'll use the smallest unit I know that is commonly used: 1/32. 32 (to an inch) divided by 25.4 is approximately 1.26/32 of an inch, or about 1 1/4 32nds of an inch.
