0
How many bags of the 40 lb peat moss are needed to cover an area measuring 10 by 24 to a depth of 1.9?
To determine how many bags of 40 lb peat moss are needed, first calculate the volume of the area to be covered. The area is 10 feet by 24 feet, giving a total area of 240 square feet. To find the volume in cubic feet for a depth of 1.9 feet, multiply the area by the depth: 240 sq ft × 1.9 ft = 456 cubic feet. Since each 40 lb bag covers about 2 cubic feet, divide the total volume by the coverage per bag: 456 cu ft ÷ 2 cu ft/bag = 228 bags needed.
What else can I help you with?
How much fill dirt is needed to cover 250 square feet?
The answer will depend on the depth to which the area is covered.
How many 4x8 of plywood are needed to completely cover a rectangle shaped floor measuring 16 feet and 12 feet?
Six (6) sheets exactly cover that area and that shape, without cutting anything.
How much area would 1 yard of crushed rock cover?
One yard of crushed rock typically covers an area of about 100 square feet at a depth of 3 inches. If you use a different depth, the coverage area will vary; for example, at 2 inches deep, one yard would cover approximately 150 square feet. Always consider the specific depth you plan to use to determine the exact coverage needed.
How many square feet of linoleum are needed to cover a floor measuring 25 feet by 22 feet?
You have to multiply the two dimensions to get the area. In this case the answer will be 550 square feet.
What is the fewest number of squares needed to cover your 1113 rectangle without overlapping?
To cover a rectangle of dimensions 1113 using squares without overlapping, the fewest number of squares needed is 2. You can use one square measuring 1111 x 1111 and another square measuring 2 x 2 to fully cover the rectangle. This approach efficiently utilizes the area while adhering to the constraint of not overlapping.
How much fill dirt is needed to cover 250 square feet?
The answer will depend on the depth to which the area is covered.
How many tons of ABC stone will it take to cover 32ft by 80ft?
To determine the number of tons of ABC stone needed to cover an area, you need to know the depth of coverage. Assuming a depth of 2 inches, you would need about 35 tons of ABC stone to cover a 32ft by 80ft area.
How much stone is needed to cover an area of 50 square meters at a depth of 15 centimeters?
50 m2 x 15 cm = 7.5 m3
How many 4x8 of plywood are needed to completely cover a rectangle shaped floor measuring 16 feet and 12 feet?
Six (6) sheets exactly cover that area and that shape, without cutting anything.
When measuring land is the surface area of mountains counted?
Yes it is also the altitude and depth
How do you determine how much sand is needed to cover a 10 by 20 area?
use a known volume container to measure a quantity = 200 x (the depth you want the sand).
How much area would 1 yard of crushed rock cover?
One yard of crushed rock typically covers an area of about 100 square feet at a depth of 3 inches. If you use a different depth, the coverage area will vary; for example, at 2 inches deep, one yard would cover approximately 150 square feet. Always consider the specific depth you plan to use to determine the exact coverage needed.
How much area does 8 cubic feet cover?
The answer depends on the depth to which the area is covered.
How many square feet of linoleum are needed to cover a floor measuring 25 feet by 22 feet?
You have to multiply the two dimensions to get the area. In this case the answer will be 550 square feet.
How do you calculate the amount of sand needed to cover 1800 square feet 2 inches deep?
You convert everything to compatible units. Then you multiply area x depth. I suggest you convert the depth to feet; in that case, the answer will be in cubic feet.
What is the fewest number of squares needed to cover your 1113 rectangle without overlapping?
To cover a rectangle of dimensions 1113 using squares without overlapping, the fewest number of squares needed is 2. You can use one square measuring 1111 x 1111 and another square measuring 2 x 2 to fully cover the rectangle. This approach efficiently utilizes the area while adhering to the constraint of not overlapping.
How do you calculate volume of fill needed for landscaping?
To calculate the volume of fill needed for landscaping, first determine the area to be filled by measuring its length and width. Then, decide on the desired depth of the fill. Multiply the area (length x width) by the depth to get the volume in cubic units (e.g., cubic feet or cubic meters). If the area is irregularly shaped, break it down into smaller sections, calculate the volume for each, and sum them up.
