0
What else can I help you with?
How many therms to heat one gallon of water 50 degrees?
To heat one gallon of water by 50 degrees Fahrenheit, you need approximately 0.2 therms of energy. This is based on the fact that it takes about 8.33 BTUs to raise the temperature of one gallon of water by one degree Fahrenheit, totaling around 416.5 BTUs for a 50-degree increase. Since one therm is equivalent to 100,000 BTUs, the calculation gives you about 0.00416 therms per degree, resulting in roughly 0.2 therms for the total increase.
How many gallons in an average hot tub?
The average-size hot tub holds approximately 475 gallons of water. The earliest known hot tubs were calderas. Hot stones were used to heat the water.
How many gallons of water in a 16x32x4pool?
About 15,360 gallons.
How many gallons are in a cubic foot of water?
One cubic foot of water is 7.4805 gallons.
How many gallons of water in a cubic foot of crushed stone?
No gallons of water. Stone does not contain water
How many natural gas therms are required to boil water?
The amount of natural gas therms required to boil water depends on the volume of water and the efficiency of the heating system. On average, it takes about 0.12 therms to heat a gallon of water, but this can vary based on factors like starting water temperature and insulation of the heating system.
How many therms to heat one gallon of water 50 degrees?
To heat one gallon of water by 50 degrees Fahrenheit, you need approximately 0.2 therms of energy. This is based on the fact that it takes about 8.33 BTUs to raise the temperature of one gallon of water by one degree Fahrenheit, totaling around 416.5 BTUs for a 50-degree increase. Since one therm is equivalent to 100,000 BTUs, the calculation gives you about 0.00416 therms per degree, resulting in roughly 0.2 therms for the total increase.
How many therms of gas is used to heat a 40000 gallon pool with a 400000 pool heater 30 degrees?
To heat a 40,000-gallon pool by 30 degrees Fahrenheit, you'll need approximately 1,200 therms of gas. This estimation assumes that it takes about 1 therm to heat 1,000 gallons of water by 1 degree Fahrenheit. The efficiency of the heater can also affect the total gas consumption, but with a 400,000 BTU heater, it should achieve the desired temperature increase relatively efficiently.
How many therms are there in 11 million btu's?
110 therms.
How many therms in a cubic meter?
The answer depends on the material. Different fuels have different amounts of heat energy.
How many therms are in 1 BTU?
There are 0.00001 therms in 1 BTU.
How many therms in a ccf of natural gas?
Under intense heat and pressure, the soft coal turns into hard coal.
How many gallons of water does a hot water heating system use?
It uses as many as you run through it, but who would want to heat hot water?
How many therms are in 1 mill Btu's?
1 million BTU = 10 Therms
How many therms in a decatherm?
The word deca- means ten, so there are ten therms in a decatherm.
How many gallons of water is in M3 of water?
264.172 gallons.
How many therms in a cubic yard?
The answer depends on the material. The number of therms in liquid nitrogen is pretty close to 0.
