10 acre = 435600 sq ft So, if it is 165 ft wide, it must be 435600/165 = 2640 ft deep.
4,467.69 feet 43,560 sq. ft. per acre X 40 = 1,742,400 1,742,400 divided by 390 = 4,467.69
One acre = 43560 sq ft.... 25 acres = 1,089,000 sq ft / 500 feet = 2,178 ft.
1 acre = 43560 sq.feet. 1 foot deep water over an acre is 43560 cubic feet, which is 325851.4 gallons in 1 foot deep. If it is 1 inch deep (1/12 foot) then it is 27154.3 gallons in 1 inch deep.
one acre = 4840 sq yd and 3 feet = 1 yard 4840 x 1 = 4840 cu yds
It would be 2,178 feet deep x 200 feet wide.
32,266 CY
1 acre = 43,560 square feet1 acre 5 feet deep = 43,560 x 5 = 217,800 cubic feet = 1,629,257 gallons (rounded)
This is the worth math I've ever seen! 1 acre = 43,560 SF, take the square root of 43,560 to give you the base numbers of the acre = 208.71 feet for both the height and width of an acre to get square feet of an acre. Divide 208.71 / 3 = 69.57 yards for the height and width of the acre. Multiply 69.57 x 69.57 = 4,840 square yards in an acre. A cubic yard is simply 4,840 square yards dug down 3 feet or one yard. So one acre has 4,840 cubic yards of dirt if you only dig down 3 feet. If you dig down 6 feet that doubles and so on. One acre would have 48,400 cubic yards of dirt if you dug down 30 feet or 10 yards. Using a one cubic yard example if you removed one cubic yard of dirt from an acre you would have 4,480 cubic yards of dirt, and one cubic yard of dirt weighs approximately 1.3 tons so once cubic acre weighs 1.3 x 4,840 acres = 6,292 tons.
To calculate the number of acres, first convert the dimensions from square feet to acres: 165 feet wide * 264 feet deep = 43,560 square feet. Then, divide by the number of square feet in an acre (43,560 square feet) to get the answer. In this case, 1 acre is equivalent to 43,560 square feet, so the area is 1 acre.
10 acre = 435600 sq ft So, if it is 165 ft wide, it must be 435600/165 = 2640 ft deep.
A 1000 acre lake that is 7 feet deep (uniformly) will have 7000 acre feet of water in it. An acre foot is an acre of water one foot deep, and the unit is used to measure reservoir water capacity. The conversion factor is that one acre foot equals about 325,851.5 gallons. The lake in question is holding 7000 times 325,851.5 gallons of water.
4,467.69 feet 43,560 sq. ft. per acre X 40 = 1,742,400 1,742,400 divided by 390 = 4,467.69
If the pond is uniformly 6-feet deep it would contain about 1,955,109 gallons of water.
No dirt because its a hole
One acre = 43560 sq ft.... 25 acres = 1,089,000 sq ft / 500 feet = 2,178 ft.
1 acre = 43560 sq.feet. 1 foot deep water over an acre is 43560 cubic feet, which is 325851.4 gallons in 1 foot deep. If it is 1 inch deep (1/12 foot) then it is 27154.3 gallons in 1 inch deep.