0
Add your answer:
Earn +20 pts
If an average cloud has a density of 0.5gm3 and has a volume of 1000000000 m3 what is the weight of an average cloud?
The density of the air at sea level is 1200 g/cubic meter. At 10 km, the air density is still 800 g/m3. I know this all seems impossibly too dense, but the atmosphere is very much denser than you think. That's why airplanes can fly and meteors and spacecraft can burn up when they hit the atmosphere. And that's why tornados and hurricanes can have such power. And a rain cloud can dump 100 million liters of water on your head. The "average cloud" (air and water) as specified above would be a cubic kilometer in volume, and using the density above would weigh about 1 x 109 kilograms, or one million metric tonnes. The question may only apply to the WATER in the cloud, which would consist of 0.5 g/cubic meter (at a relative humidity of 100%, it would have to be very cold air) and have a transport weight of 0.5 x 109 grams, or 500,000 kg more than dry air. Even this thin cloud has a half-million liters of water, enough to fill 4 large backyard pools.
How many hours or minutes can a coil burn?
It depends on the size of the coil and the burn rate.
What is the Parkland formula to calculate the fluid needs of a burn patient?
weight of person * percentage of burn% * 4=
Why does a sparkler burn top to bottom?
Aha! A sparkler burns top to bottom only because you light the top. If you lit the bottom, it would burn bottom to top. If you lit the middle, it would burn both directions from the middle.
What do you do when you burn your foot?
hmm...if you burn your foot then my suggestion is clean the burn with hydrogen peroxide, but rinse with cool or warm water, and then u apply the peroxide. If it is small then maybe you just oput dabs of toothpaste on it...it is what i do. and then put a bandage if desired.
How much air is required to burn 1 cubic foot of natural gas?
1000
How many cubic feet of air does it require for a furnace to burn 1 cubic foot of natural gas?
9.54
Trying to solve a mystery does anyone know if natural diamonds that go through a fire will have smoke residue on them?
A carbon diamond natural or not will burn up in a fire if it's hot enough. A fake diamond like cubic zirconium will not burn.
How many cubic meter wood you burn in a winter season?
It depends on where in the world you are. In some places you would not burn any because the winters don't get that cold. In other places you cannot because of clean air laws.
How much air is required to burn 1 kg of lpg?
Approximately 25 cubic meters of air is required to burn 1 kg of LPG completely. This is based on the stoichiometric ratio for the combustion reaction of LPG with oxygen.
How do you convert therms to cubic meters?
To convert therms to cubic meters, you need to know the energy content in therms and the calorific value in cubic meters. One therm is equivalent to 2.83 cubic meters of natural gas at standard temperature and pressure. Using this conversion factor, you can multiply the number of therms by 2.83 to get the equivalent volume in cubic meters.
What gases are in a cooker?
Mains gas is Natural gas or methane CH4stored gas/ bottle gas is LPG or Liquefied petroleum gasOxygen from the air is also required for these to burn.
How many cubic feet of air must be supplied to burn 1 cubic feet of gas?
Approximately 10-15 cubic feet of air is needed to burn 1 cubic foot of gas, depending on the type of gas and the specific combustion conditions. This is known as the stoichiometric ratio, which ensures complete combustion of the gas.
How do you get the energy form natural gas?
You burn it.
Ignition temperature is the minimum temperature required to?
burn
How to know when a time-delay fuse is old or burn?
Check it with an OHM meter for continuity.
What element is required to burn paper?
Burning is the rapid Oxidation of a Compound. Therefore the Element Oxygen is required.
