0
To calculate the amount of ballast required for 2 cubic meters of concrete, you typically need to consider the concrete mix ratio. A common mix is 1 part cement, 2 parts sand, and 4 parts ballast. For 2 cubic meters of concrete, you would need approximately 1.5 cubic meters of ballast, assuming the total volume is made up of the components in that ratio. Adjustments may be necessary based on the specific mix design used.
What else can I help you with?
How much water is REQUIRED in one cubic meter of concrete?
12L
What is the volume of a cylinder 3ft tall with a 10ft radius in cubic meters?
26.69 cubic metres.26.69 cubic metres.26.69 cubic metres.26.69 cubic metres.
Cost of concrete in 1300 square feet?
A cubic measure ment is required
How many cube test required for 1 cubic meter concrete?
0.2
How many 25kg bags of ballast and 25kg bags of cement are needed to make 1 cube meter of concrete?
To make 1 cubic meter of concrete, you typically need about 350 kg of cement and 700 kg of ballast (aggregates). Given that each bag of cement weighs 25 kg, you would need 14 bags of cement. For ballast, with each bag also weighing 25 kg, you would require approximately 28 bags of ballast.
How do you convert kg of Ballast into cubic metres?
1.75 tonnes 1,750 kg of ballast is one cubic metre, if its concrete then you'd need to add 300kg of cement to mix this to the right ratio for a foundation.
Can you convert cubic meters of concrete into tons of ballast and cement?
2.7 t
How much is 23 cubic foot of concrete?
It is 0.65 cubic metres, approx.
What is the tonnes of sand required in one cubic metre of grade 25 concrete?
In grade 25 concrete, which typically has a mix ratio of 1:1:2 (cement:sand:aggregate), approximately 0.5 cubic metres of sand is required per cubic metre of concrete. Since the density of sand is about 1,600 kg per cubic metre, this translates to around 800 kg of sand needed for one cubic metre of grade 25 concrete. This amount can vary slightly based on the specific mix design and moisture content of the sand.
How many bags of cement needed to 1 tonne bag of ballast to make concrete?
To make concrete, the typical mix ratio commonly used is 1 part cement to 6 parts ballast (by volume). This means for every 1 tonne of ballast, you would need approximately 166.67 kg of cement, since 1 tonne of ballast is about 1 cubic meter, and a standard concrete mix requires 1 bag (usually 25 kg) of cement for every 0.15 cubic meters of concrete. Therefore, you would need around 6 to 7 bags of cement for 1 tonne of ballast, depending on the specific mix design.
How much water is REQUIRED in one cubic meter of concrete?
12L
Is cubic meter of concrete same as a square meter of concrete?
No. A cubic metre is a volume measurement, what you can fit in a box, 1x1x1 metres in dimension. A square metre is an area measurement corresponding to 1x1 metre.
What is the volume of a cylinder 3ft tall with a 10ft radius in cubic meters?
26.69 cubic metres.26.69 cubic metres.26.69 cubic metres.26.69 cubic metres.
How big is two cubic metres?
A box measuring 1 m × 1 m × 2 m would have a volume of 2 m3. The wikipedia article on cubic metres, http://en.wikipedia.org/wiki/Cubic_metre, has an a image of 1 cubic metre of concrete - 2 of those, side by side, would equal 2 cubic metres.
How big is 250 cubic meter of glass waste?
The answer is in the question: 250 cubic metres!The answer is in the question: 250 cubic metres!The answer is in the question: 250 cubic metres!The answer is in the question: 250 cubic metres!
Cost of concrete in 1300 square feet?
A cubic measure ment is required
How much sand is required for one cubic meter of concrete for slab?
For one cubic meter of concrete used in a slab, approximately 0.3 to 0.5 cubic meters of sand is typically required, depending on the specific mix design. A common concrete mix ratio for slabs is 1:2:4 (cement:sand:aggregate), which translates to about 0.4 cubic meters of sand for each cubic meter of concrete. However, the exact amount may vary based on the desired strength and workability of the concrete.
