Need to know width in order to answer this.
To determine how much gravel is needed to fill an area of 10 by 5 feet, you first calculate the area by multiplying the length and width: 10 feet × 5 feet = 50 square feet. Next, decide on the desired depth of the gravel fill (for example, 3 inches or 0.25 feet). Multiply the area by the depth to find the volume in cubic feet: 50 square feet × 0.25 feet = 12.5 cubic feet of gravel required.
To calculate the amount of gravel needed, first convert the 6-inch depth to feet, which is 0.5 feet. Then, multiply the area (1000 square feet) by the depth (0.5 feet): 1000 sq ft × 0.5 ft = 500 cubic feet. Therefore, you will need 500 cubic feet of gravel to fill the space.
To determine how much gravel you need to cover a 2,400 sq ft area, you first need to decide on the desired depth of gravel. For example, if you want a depth of 3 inches, you would convert that depth to feet (3 inches = 0.25 feet) and then multiply the area by the depth: 2,400 sq ft x 0.25 ft = 600 cubic feet. Since gravel is typically sold by the cubic yard, you'll convert cubic feet to cubic yards by dividing by 27 (1 cubic yard = 27 cubic feet), resulting in approximately 22.2 cubic yards of gravel needed.
Depends on what depth you want to spread the gravel at. This answer depends on knowing the cubic capacity of 50 lbs. of gravel.
To determine how much peat gravel is needed for a 10x10 area, you first need to decide on the desired depth of the gravel layer. For example, if you want a depth of 2 inches, you would calculate the volume: 10 feet x 10 feet x (2/12) feet = approximately 16.67 cubic feet. Since peat gravel typically weighs about 1,200 pounds per cubic yard, you would need around 0.62 cubic yards of gravel, which is roughly 1,200 pounds. Adjust the depth accordingly to calculate the required amount for different thicknesses.
The coverage area of 5 cubic feet of pea gravel will depend on the thickness at which it is spread. To determine this, you will need to know the desired depth of the pea gravel. You can calculate the square footage coverage by dividing the volume of the gravel (5 cubic feet) by the desired depth in feet.
Can't answer unless we know the depth of the gravel and width of the area.
To determine how much gravel is needed to fill an area of 10 by 5 feet, you first calculate the area by multiplying the length and width: 10 feet × 5 feet = 50 square feet. Next, decide on the desired depth of the gravel fill (for example, 3 inches or 0.25 feet). Multiply the area by the depth to find the volume in cubic feet: 50 square feet × 0.25 feet = 12.5 cubic feet of gravel required.
To calculate the amount of gravel needed, first convert the 6-inch depth to feet, which is 0.5 feet. Then, multiply the area (1000 square feet) by the depth (0.5 feet): 1000 sq ft × 0.5 ft = 500 cubic feet. Therefore, you will need 500 cubic feet of gravel to fill the space.
If you use a depth of 3 inches, that area will be about 16.2 cubic yards (around 20.785 tons) of gravel.
Depends on what depth you want to spread the gravel at. This answer depends on knowing the cubic capacity of 50 lbs. of gravel.
To determine how much peat gravel is needed for a 10x10 area, you first need to decide on the desired depth of the gravel layer. For example, if you want a depth of 2 inches, you would calculate the volume: 10 feet x 10 feet x (2/12) feet = approximately 16.67 cubic feet. Since peat gravel typically weighs about 1,200 pounds per cubic yard, you would need around 0.62 cubic yards of gravel, which is roughly 1,200 pounds. Adjust the depth accordingly to calculate the required amount for different thicknesses.
To determine how much gravel you need for a 12ft by 12ft garden, you first need to decide on the depth of the gravel layer. For example, if you want a depth of 3 inches (0.25 feet), you would calculate the volume as follows: 12ft x 12ft x 0.25ft = 36 cubic feet. Since there are 27 cubic feet in a cubic yard, you would need approximately 1.33 cubic yards of gravel.
9.26 cubic yards for every inch of depth.
To calculate the amount of gravel needed for walking paths, you can use the formula: Volume = Length × Width × Depth. First, measure the length and width of the path in feet, then determine the desired depth of gravel in feet. Multiply these three dimensions together to get the volume in cubic feet, and if needed, convert this volume to cubic yards by dividing by 27 (since there are 27 cubic feet in a cubic yard).
It depends on how thick you want the gravel to be. All dimensions will be in feet. (fractions) Width x length x depth divided by 27 equalls cu. yds.
Approximately 155cm