0
What else can I help you with?
How many pounds of ice equal one imperial gallon of water?
10 pounds of water (molten ice) = 1 imperial gallon. (at standard atmospheric pressure and temperature).
If a piece of iron with a temperature of 300 degrees celsius is dropped into a gallon of water with a temperature of 25 degrees Celsius heat will?
heat will flow from the iron to the water until both are the same temperature
How much water does it take to fill a gallon?
Errrh, would it be a gallon of water?
What is kcal?
1 kcal equal 1 000 calories or 4,184 joules. 1 calorie is equal to the heat needed to increase the temperature of 1 g water with 1 0C.
How many btu does it take to raise the temperature of 1 gallon of water 1 degree if water was already 50 degrees?
U.S.gallon = 8.33 pounds of water. Therefore to raise the temperature by one degree F will require 8.33 BTU. The initial temperature of 50 F is inconsequential.
Gas cost to heat one gallon of water?
The cost to heat one gallon of water depends on the efficiency of the water heater, the cost of natural gas, and the temperature increase needed. On average, it can cost around 25-35 cents to heat one gallon of water using natural gas.
How many BTUs does it take to raise the temperature in a 40 gallon water heater 60 degrees F?
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
How many btus does it take to heat up one gallon of water?
It takes 8.33 BTUs to heat up one gallon of water by one degree Fahrenheit. The amount of energy needed to heat the water to a desired temperature will depend on the starting temperature and the desired final temperature.
How many halfpint cartons of water are needed to fill the gallon container?
16 halfpint cartons of water are needed to fill the gallon container
How many gallons of heating oil does it take to heat one gallon of water?
The amount of heating oil needed to heat one gallon of water varies depending on the efficiency of the heating system. Generally, it can take about 0.03 to 0.05 gallons of heating oil to heat one gallon of water.
Does a gallon of water weigh about 400 grams?
No, a gallon of water weighs approximately 3,785 grams (8.34 pounds) at room temperature.
Does drinking water increase sweating?
Drinking water does not directly increase sweating. Sweating is primarily regulated by the body's internal temperature and hydration levels. Drinking water helps maintain proper hydration, which can support the body's ability to regulate temperature through sweating when needed.
Does the volume of water affect the temperature increase when reacted with calcium oxide?
yeah the temperature does increase, when you increase the volume of water the temperature of calcium hydroxide increases too!
How much propane is used to heat a 50 gallon water heater from 75 degrees to 105 degrees?
The amount of propane needed to heat a 50 gallon water heater from 75 degrees to 105 degrees would depend on factors such as the efficiency of the water heater, the starting temperature of the water, and the ambient temperature. It is difficult to provide an exact amount without this information.
How much does a water gallon weigh?
A gallon of water weighs approximately 8.34 pounds (3.78 kilograms) at room temperature.
What information is needed to calculate the amount of energy needed to heat of volume of water to some temperature?
You need the amount of water, the temperature of the water, and the desired temperature.
How much energy is needed to increase the temperature of a kilogram of water 5 degrees?
The specific heat capacity of water is 4.186 J/g°C. Since there are 1000 grams in a kilogram, it would require 20,930 Joules of energy to increase the temperature of a kilogram of water by 5 degrees Celsius.
