I have old (20 plus probably) Kentile flooring in my home that I would like to wax. They are very dull and only stay shiny for a short period of time when I wax them with just a generic floor wax such as Johnsons or Armstrong. Does anyone know the proper procedure for cleaning, sealing, waxing this type of floor? Vinyl flooring is the easiest flooring to maintain. It cleans up easily with a myriad of products. I prefer "Armstrong" vinyl floor cleaner. It is available at most supermarkets. Follow the instructions on the label. For deeper cleaning- particularly on textured vinyl- get on your hands and knees and use a scrub brush. I'm sure you'll be pleased with the results.
2400 sq ft took appro. 8 hours for a two man team
20 ft x 20 ft = 400 sq ft.
20 ft * 20 ft = 400 square feet
WAX=ABCthenABC=WAX
It depends on the length and width of the floor
It wont accept wax.. sorry
.40 to a buck depending...
strip the wax and rewax, or apply mild heat and rebuff the affected area.
I am not sure how much to charge for strip and wax. It all depends on how much it cost to get.
Depending on the contractor doing it anywhere from .08 - .50 per sqft. 8 cents is a quick and dirty strip and wax and at 50 cents I would expect to be able to read a newspaper from the reflection. Either way make sure that the contractor you choose is experienced and walk the floor between the end of the strip and before the wax is laid. Any imperfections that you see will show through on the final finish. Also have the floor burnished within a week of finishing to fully harden the wax and maximize the shine.
Too much wax can make the floor feel rather sticky.
the right amount is £70.90
Because home made floor wax is higher quality.
There is no reason to wax a tile floor.
it is 2012 house cost and food are up! People I charge 2.00 a sqft and get it!
Vinyl is the only "no wax" floor I am aware of and removing the wax should not damage the vinyl finish. You can get removal products at most flooring stores that are specifically designed for this purpose. I took the "no wax" wax off my "no wax" floor and it looked better than ever.