1. Measure the length of one of the sides and cube it (ie multiply the length by the length by the length) 2. Get a bowl with enough water to cover the cube; mark the level of the water; submerge the cube in the water and mark the new level of the water. The volume of the cube is the volume between the two marks - this can be measured by removing the cube and using a measuring jug to measure the amount of water that is needed to be added to raise the water from the first mark to the second mark.
what is the weight of salt water of one cubic meter
one cubic metre= one ton
To find the measurement of water in 1 cubic meter (cubic meter is often referred to as "cubic" in shorthand), you can use the fact that 1 cubic meter of water has a mass of approximately 1,000 kilograms or 1 metric ton. In terms of volume, 1 cubic meter is equal to 1,000 liters of water. Therefore, if you are measuring water in cubic meters, 1 cubic meter corresponds to 1,000 liters of water.
The mass of a cubic meter of water is approximately 1 metric ton. This is because the density of water is about 1,000 kilograms per cubic meter, and since 1 metric ton equals 1,000 kilograms, a cubic meter of water weighs 1 metric ton.
To raise water 1 meter, you would need to exert a pressure equivalent to the weight of the water column above. For water, the pressure increase with depth is 9.81 kPa per meter. Therefore, to raise water 1 meter, you would need to apply a pressure of 9.81 kPa.
To adjust the water level in your toilet, locate the fill valve in the tank and adjust the float mechanism to control the water level. Turn the adjustment screw or bend the float arm to raise or lower the water level as needed.
It doesn't raise the water level. It lowers it. Whoever told you that it raises the water level lied to you.
Any dam will raise the water level behind it.
To adjust the water level in your toilet bowl, locate the fill valve in the tank and adjust the float mechanism to control the water level. Turn the adjustment screw or bend the float arm to raise or lower the water level as needed.
To adjust the water level in the toilet bowl, locate the fill valve in the tank and adjust the float mechanism to control the water level. Turn the adjustment screw or bend the float arm to raise or lower the water level as needed.
To adjust the water level in a toilet, locate the fill valve in the tank and turn the adjustment screw clockwise to raise the water level or counterclockwise to lower it. Flush the toilet to check the new water level and make further adjustments if needed.
bring a water type or raise your level bring a water type or raise your level
the moon
To raise the water level in a toilet bowl, adjust the float valve in the toilet tank to allow more water to enter the bowl after flushing.
To raise the water level in the beaker, you should add more water to it. The amount of water added should be equal to the volume you want the water level to increase by.
because of the elevation