Yards if you work in imperial units or metres if you work in metric units
Multiply two fifths by two to get a common denominator. Then you will have 4 tenths plus three tenths. then add straight across and you will get seven tenths.
To work out the area of a rectangle you simply multiply the width by the length:Here the width and length are 7 and 8 so by multiplying them together you get:56Remember, that if units are involved such as centimetres, you must write a squared sign after the digits. For example if it were 7cm and 8cm, you would write the answer as 56cm2
Less digits to work with. As an example, to multiply 4000 x 30,000, you only need to multiply 4 x 3, then attach all the zeros (7 zeros in this case) at the end. WITH A LITTLE BIT OF PRACTICE, YOU CAN DO THIS CALCULATION IN YOUR HEAD. However, if there are more significant digits (roughly speaking, non-zero digits), most people would need pencil and paper, or a calculator, to do such a calculation.
To multiply 564 by 678, you would first multiply the units digits (4 and 8) to get 32. Write down the 2 and carry over the 3. Next, multiply the tens digits (6 and 6) to get 36, then add the carried over 3 to get 39. Write down the 9 and carry over the 3. Finally, multiply the hundreds digits (5 and 7) to get 35, then add the carried over 3 to get 38. Therefore, 564 times 678 is 382,392.
Yards if you work in imperial units or metres if you work in metric units
8. A way to work this out is figure out how many possible digits can go in each place value position (units, tens, hundreds) and multiply these together. Since there are 2 possible digits that can go in each position and there are three positions, you would go: 2 x 2 x 2 = 8 Want a list? 222 225 252 255 555 552 525 522
It will help a lot if you know how to write "four tenths" in numbers.Four tenths = 0.47.3 minus 0.4 = 6.9
Multiply two fifths by two to get a common denominator. Then you will have 4 tenths plus three tenths. then add straight across and you will get seven tenths.
To work out the area of a rectangle you simply multiply the width by the length:Here the width and length are 7 and 8 so by multiplying them together you get:56Remember, that if units are involved such as centimetres, you must write a squared sign after the digits. For example if it were 7cm and 8cm, you would write the answer as 56cm2
The units for work are joules, which is equivalent to a newton-meter. The units for potential energy and kinetic energy are also joules.
Yes, work and energy have the same units. Both work and energy are measured in joules (J) in the International System of Units (SI).
Less digits to work with. As an example, to multiply 4000 x 30,000, you only need to multiply 4 x 3, then attach all the zeros (7 zeros in this case) at the end. WITH A LITTLE BIT OF PRACTICE, YOU CAN DO THIS CALCULATION IN YOUR HEAD. However, if there are more significant digits (roughly speaking, non-zero digits), most people would need pencil and paper, or a calculator, to do such a calculation.
To multiply 564 by 678, you would first multiply the units digits (4 and 8) to get 32. Write down the 2 and carry over the 3. Next, multiply the tens digits (6 and 6) to get 36, then add the carried over 3 to get 39. Write down the 9 and carry over the 3. Finally, multiply the hundreds digits (5 and 7) to get 35, then add the carried over 3 to get 38. Therefore, 564 times 678 is 382,392.
The units for work done are joules (J) in the International System of Units (SI). Another common unit for work is the erg in the centimeter-gram-second system.
It is nine and six tenths. To get deeper into the "meaning" of a number you would need to study Dedekind's work. This site is not best suited for that.
249 + 318 = 567