0
What else can I help you with?
How many revolutions of crank are needed to move the screw block 1 inch?
The number of revolutions needed to move a screw block 1 inch depends on the screw's lead, which is the distance the screw moves linearly with one full revolution of the crank. For instance, if the screw has a lead of 0.1 inches, it would take 10 revolutions to move the block 1 inch. To determine the exact number of revolutions, you would divide 1 inch by the lead of the screw.
Eight turns of a screw advance it 4 inches. How many inches will ten turns advance it?
8 turns-4 inches2 turns-1 inch10 turns-5 inchesI can explain;)when we divide the eight turns by 4, we must divide 4 inches by 4 too. Then, when we multiply the 2 turns by 5, we must multiply the 1 inch by 5 too.Hope this clarified your doubts>
When an 8 square inch piston moves 5 inches within a cylinder the volume of a liquid displaced will be?
Volume = pi*r2*h = 8*5 = 40 cubic inches
How many inches are 1 inch above 61 inches?
1 inch above 61 inches is 62 inches
How many inches is 1.875 of an inch?
1.875 of an inch is simply 1.875 inches. It can also be expressed as 1 inch and 7/8 of an inch, since 0.875 inches is equivalent to 7/8 of an inch.
How long is a three fourth inch screw?
4 inches or longer
Eight turns of a screw advance it 4 inches. How many inches will ten turns advance it?
8 turns-4 inches2 turns-1 inch10 turns-5 inchesI can explain;)when we divide the eight turns by 4, we must divide 4 inches by 4 too. Then, when we multiply the 2 turns by 5, we must multiply the 1 inch by 5 too.Hope this clarified your doubts>
What is the theoretical mechanical advantage of a screw that has four threads per inch and a pitch diameter of 2.25 inches?
6.3
How are screw sizes given?
Screw sizes are typically given as a combination of a diameter and a length. The diameter is usually measured in millimeters or inches, while the length is measured in inches. For example, a screw size of 4-40 indicates a #4 diameter screw with 40 threads per inch.
What is the recommended pocket screw length for joining two pieces of wood with a thickness of 1 inch?
The recommended pocket screw length for joining two pieces of wood with a thickness of 1 inch is 1 1/4 inches.
How far will a 26 inch diameter bicycle tire travel each time it turns?
81.7 inches
What is the recommended screw length for attaching hardware to 3/4 plywood?
The recommended screw length for attaching hardware to 3/4 inch plywood is 1-1/4 inches.
What is the recommended size for a number 6 screw to securely fasten the components together?
The recommended size for a number 6 screw to securely fasten components together is typically a 3/32 inch diameter screw with a length of 1 to 1.25 inches.
What is screw thread micrometer?
This is a tool that is used to measure the pitch diameter of a screw. This tool looks like a standard micrometer except that the anvils are specially configured to reach into the screw thread groove and touch the pitch diameter of the screw thread. The screw thread micrometer does not measure any other aspect of the screw thread. It does not measure the: pitch; threads-per-inch; major diameter; minor diameter; flank angles; lead; helix angle.
What size screw do you use to mount a westinghouse 32 inch led tv?
A Westinghouse 32 inch TV should be mounted to the wall with a half inch screw. A larger screw can be used, if available.
When an 8 square inch piston moves 5 inches within a cylinder the volume of a liquid displaced will be?
Volume = pi*r2*h = 8*5 = 40 cubic inches
What thing moves inch by inch?
An inchworm.
