0
What else can I help you with?
If a piston has a radius of 2.5 inches and a height of 5 inches what is its volume?
Volume of a cylinder = pi*r2*h where r is the radius and h the height. = pi*2.52*5 = 98.2 cubic inches.
What is the function of the cylinder?
The cylinder is where your piston runs, so in easy terms its just your piston housing. So a 4 cylinder engine simply means it has 4 pistons and so on.
Is piston cylinder process is constant pressure process or constan volume process?
A piston cylinder process actually includes two processes. The gas inside the piston undergoes both the constant pressure process and the contant volume process.
What is Piston movement from top to bottom of the cylinder called?
Stroke
If a typical radial engine has a bore of 5.5 inches and a stroke of 5.5 inches what is the area and where is the piston displacement?
This is the formula. Area = .7854 x bore^2 A = .7854 x 30.25 (5.5^2) A= 23.75 sq.in Volume = Area x stroke 23.75 x 5.5 = 130.625 cubic inches. *This is just one piston. If engine was a nine cylinder then 130.625 x 9 = 1175.625*
What does cdi mean on a car?
Cubic displacement inches (the volume in inches displaced by the piston/s).
What is the piston displacement of a master cylinder with a 1.5 inch diameter bore and a piston stroke of 4 inches?
9.4247 cubic inches
If the cylinder of 20mm diameter is depressed 200mm how far will the slave cylinder of 100mm diameter move?
The volume of a right circular cylinder is pi r2 h. The volume displaced by the 20mm piston is pi 102 200, or 62831.8. The volume displaced by the 100mm piston must be the same, so solve for h in pi 502 h = 62831.8, or h = 8mm.
What does engine displacement 208 cc mean?
208 cubic centimeters , or the volume displaced by the piston moving through the cylinder for the length of the stroke .
What force is exerted on the piston in a hydraulic cylinder if the area of piston is 1.2 square inches and the fluid pressure is 850 psi?
The force exerted on the piston in the hydraulic cylinder is calculated by multiplying the pressure by the area. In this case, the force would be 1,020 pounds (850 psi * 1.2 square inches = 1,020 pounds).
What is fit in pisTon and cylinder arrangement?
No fit.BECAUSE No contact between piston and cylinder.
What keeps a piston from tipping in its cylinder?
The piston is prevented from tipping in the cylinder by the piston rings, which provide stability and guidance as the piston moves up and down within the cylinder. Additionally, the piston skirt design and cylinder wall clearance also help to maintain proper alignment of the piston during operation.
If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?
-1
What is a cylinder jug?
The "cylinder jug" is the cylinder. This is the area that the piston and piston rings moves up and down in when the engine is turning.
What is a Piston cylinder?
A cylinder is the central working part of a reciprocating engine, the space in which a piston travels.
Is the compression ratio of a piston inside its cylinder measured mechanically or atmospherically?
Mechanically To put it as simply as possible. The cubic inches of a cylinder and the amount of space your compressing it into is the compression ratio.
What is locks?
That is when a cylinder fills with liquid and will not move. Liquids will not compress like air so it will stop the piston and usually damage the engine
