0
This will depend on many things including:
- the spacing between the rafters;
- the spacing between the studs;
- the pitch of the roof;
- the wind zone;
- the type of fixings being used; and
- the span of the rafters.
What else can I help you with?
What is 24 inches on center?
"24 inches on center" refers to the spacing of structural elements, such as studs, joists, or rafters, in construction. It means that the center of one structural member is located 24 inches from the center of the next member. This spacing is commonly used for framing walls and ceilings, providing adequate support while allowing for efficient use of materials and insulation.
What are the walls rebuild by Nehemiah?
The walls surrounding the old city of Jerusalem.
What are the 3 uses of Roman Numerals?
on clocks,roman time, and walls on clocks,roman time, and walls on clocks,roman time, and walls
What geometric term describes the intersection of two walls?
The geometric term that describes the intersection of two walls is an "edge." In three-dimensional space, the edge represents the line where two flat surfaces, in this case, the walls, meet. If the walls form a corner, the intersection can also be referred to as a "vertex."
How can you determine that two walls of a building are parallel?
Measure the distance at different places. If the walls are parallel, then the distance will be the same.
What is the purpose of joist hangers for rafters in a construction project?
Joist hangers for rafters are used in construction projects to provide structural support and stability by connecting the rafters to the supporting beams or walls. They help distribute the weight of the roof evenly and prevent the rafters from shifting or sagging over time.
Can tortoises clime up walls?
No they can not..its imposible. their feet are not made for climbing anytihing, just walking and they are simply to heavy and not strong enough to climb up walls.
Are glass bricks strong enough to be used on structural work?
Yes, glass bricks are strong enough to be used on structural work. They can be used for interior and exterior walls. They are used for decorative purposes and structural.
How do you find out how much insulation you will need in your shop that is 8 feet 10 inches tall and 14 feet x 24 feet?
Unfortunately that is not enough information. Is it built with 2x4 walls? 2x6? 2x8? 16 inch on centers? 24 inch on centers? Is there an attic? Trusses, flat roof with 2x10 rafters? If there is an attic you will be well insulated if you use blown-in cellulose. You will need about 300 cubic feet of blown in cellulose for an attic. If it's 2x10 rafters you will need about 336 square feet of 2x10 insulation blankets that are the width of the space between your rafters. If it's 24 inch on center rafters, you will need 24 inch blankets. You will need about 660 square feet of insulation for the walls, less the area of the doors and windows. Again, if it's 24 inch on center 2x6 walls, get the appropriate insulation blankets.
What is a facia?
Fasciaboard is a type of roof trim that is commonly used on houses. It is mounted on the exposed ends of rafters or the top of exterior walls
What is facia...?
Fasciaboard is a type of roof trim that is commonly used on houses. It is mounted on the exposed ends of rafters or the top of exterior walls
What kind of framework is used to help support the construction of a sloped roof?
Most sloped roofs are supported by a purlin bracing system. A board the same size as or larger than that of the rafters is placed on edge perpendicular to the rafters and attached on the bottom side of the rafters. Legs are then placed under the purlin brace and with the top notched under the purlin and the bottom placed on and attached to the top of a wall, thus transferring the weight of the roof from the rafters to the top of the walls.
What are Structural members of a pitched roof?
For a typical gable roof you have a ridge board at the top with rafters running from the ridge to the top plates of the walls
How can one identify load bearing walls in a building?
To identify load-bearing walls in a building, look for walls that run perpendicular to the ceiling joists or rafters, walls that are directly above beams or columns, or walls that are located near the center of the building. Additionally, consult building plans or hire a structural engineer for a professional assessment.
How are roof rafters typically framed in a residential construction project?
Roof rafters in residential construction projects are typically framed by cutting and assembling them on-site to form the pitched roof structure. They are usually placed at regular intervals along the top of the exterior walls and are secured in place with nails or screws. The rafters provide support for the roof sheathing and help distribute the weight of the roof evenly.
Who was the owner of Lincoln castle in Norman times?
Well they changed because of many reasons, some being the walls and buildings just weren't strong enough.
Why do subwoofers vibrate you?
Sound is vibration of the air that we detect mostly with our ears. When the sound (vibration) gets to low enough frequencies and is strong enough it vibrates other things, like the walls, floor, furniture, and us!
