The circumference is Pi multiplied by the diameter. In this case, the circumference is 18Pi. We can only approximate this since Pi is an irrational number. The circumference is about 56.55 inches.
No. The units don't matter, the circumference always equals pi times the diameter. (This is only true of the circumference and diameter are in the same units. If for example, the circumference was in feet and the diameter in inches, the feet must be change to inches or the inches to feet in order for this relationship to be true.)
A cone-shaped object will not roll in a straight line because the circumference of the cone changes from one end to the other. For example, if one end of the cone has a circumference of 10 inches, that end will travel 10 inches per revolution, but if the other end of the cone has a 2 inch circumference, it will only travel 2 inches per revolution.
Well this depends on If the radius is 40 inches or If 40 inches is the entire diameter. Circumference is determined using the formula Pi x Radius² Assuming 40 is only a radius it would be 3.14 x 40² or 3.14 x 1600 = 5024 inches If 40 inches is the entire diameter then its simply Pi x Diameter since the entire diameter is the radius squared. 3.14 x 40 = 125.6 inches.
The area of a circle is easily found by multiplying its radius squared times the constant pi. If only the circumference is known, the radius is found by taking 1/2 of the circumference divided by pi.
The circumference is Pi multiplied by the diameter. In this case, the circumference is 18Pi. We can only approximate this since Pi is an irrational number. The circumference is about 56.55 inches.
To find the circumference of the tires, you can use the formula: Circumference = π * Diameter. Given that the diameter is 4.0 inches, you can plug it into the formula to find the circumference. Circumference = π * 4.0 inches = 12.56 inches (approximately)
No. The units don't matter, the circumference always equals pi times the diameter. (This is only true of the circumference and diameter are in the same units. If for example, the circumference was in feet and the diameter in inches, the feet must be change to inches or the inches to feet in order for this relationship to be true.)
The circumference of a hockey puck is approximately 9.5 inches.
no..only a few inches long no..only a few inches long
A circumference is only applicable to circles but if you mean the perimeter of a 30 in by 32 in rectangle then it is 30+32+30+32 = 124 inches
A cone-shaped object will not roll in a straight line because the circumference of the cone changes from one end to the other. For example, if one end of the cone has a circumference of 10 inches, that end will travel 10 inches per revolution, but if the other end of the cone has a 2 inch circumference, it will only travel 2 inches per revolution.
To determine the cubic inches of a ball when you only know the circumference, you first need to find the radius by dividing the circumference by 2π. Then, you can use the formula for the volume of a sphere, V = 4/3 πr³, where r is the radius that you calculated.
Well this depends on If the radius is 40 inches or If 40 inches is the entire diameter. Circumference is determined using the formula Pi x Radius² Assuming 40 is only a radius it would be 3.14 x 40² or 3.14 x 1600 = 5024 inches If 40 inches is the entire diameter then its simply Pi x Diameter since the entire diameter is the radius squared. 3.14 x 40 = 125.6 inches.
The area of a circle is easily found by multiplying its radius squared times the constant pi. If only the circumference is known, the radius is found by taking 1/2 of the circumference divided by pi.
The rectum is short; only about 6 inches long.
A circle that is 4.25 inches implies that its circumference is 4.25 inches; that is, it is 4.25 inches around. The formula for the circumference of a circle is given as c = 2πr, where c is the circumference, pi is a constant (approximately 3.14), and r is the radius of the circle. Since the c-value is known we can use algebra to manipulate the formula in order to solve for r (the only missing piece of information). Doing so yields r = c/2π. Substituting the circumference of 4.25 inches into the formula reveals that the radius must be .68 inches (rounded to two decimal places). Now that the radius of the circle is known, the surface area can be calculated with the formula A = πr2. Substituting the determined value of the radius in for r produces a surface area of 1.45 inches2. The unit of square inches comes from the fact that we are not only multiplying the numerical value of the radius, but also its units. In this case, r2 = (0.68 inches)(0.68 inches) = 1.45 inches2.