0
The nominal size of a board is used to calculate board feet, not the actual size. Nominal dimensions refer to the board's rough-cut measurements, typically expressed in inches (e.g., 2x4), while the actual size is smaller due to milling (e.g., a 2x4 actually measures about 1.5x3.5 inches). To calculate board feet, you multiply the nominal dimensions and the length of the board in feet, using the formula: (Thickness in inches × Width in inches × Length in feet) / 12.
What else can I help you with?
How many 2x6x10 boards covers 260 square feet?
To find out how many 2x6x10 boards are needed to cover 260 square feet, first calculate the area of one board. A 2x6 board is actually 1.5 inches by 5.5 inches in nominal dimensions. Converting to square feet, one board is 1.5/12 * 5.5/12 = 0.0625 square feet. A 10-foot board has an area of 0.0625 * 10 = 0.625 square feet. To cover 260 square feet, you would need 260 / 0.625 = 416 boards.
How 1x6 16' to cover 110 sq ft?
To determine how many 1x6 boards, each 16 feet long, are needed to cover 110 square feet, first calculate the area of one board. A 1x6 board is actually 0.75 inches thick by 5.5 inches wide, which converts to 0.0625 feet by 0.4583 feet. The area of one board is approximately 0.0287 square feet. Dividing 110 square feet by this area gives you about 3,833 boards, but since each board is 16 feet long and covers more area, you should calculate using the total coverage of each board properly. You’d actually need around 12 boards to cover that area, considering the actual dimensions.
What is the formula to figure board feet in logs?
The formula to calculate board feet in logs is: ( \text{Board Feet} = \frac{(\text{Diameter}^2 \times \text{Length})}{16} ) where the diameter is measured in inches and the length is measured in feet. This formula estimates the volume of lumber that can be produced from a log, with the result expressed in board feet.
What is the actual size of 2x10 16?
The actual size of a 2x10 is typically 1.5 inches by 9.25 inches, as the nominal dimensions of lumber do not reflect the true dimensions after drying and planing. Therefore, a 2x10 board is 1.5 inches thick and 9.25 inches wide. The length can vary, commonly available in lengths like 8, 10, 12, or 16 feet.
How many board feet of wood is there in 750-2 multiplied by 10-16'?
To find the board feet in 750-2 multiplied by 10-16', we first interpret the expression. If it's referring to a volume of wood where 750-2 means 748, and assuming "10-16'" indicates a length of 10 feet by a height of 16 feet, we can calculate the board feet. The formula for board feet is: ((Thickness \times Width \times Length) / 12). However, without specific thickness and width values, we cannot calculate the exact board feet. Please provide additional details for an accurate calculation.
How do you Calculate board feet to linear board feet?
BF = nominal thickness" (t) x nominal width" (w) x linear feet'(LF)/ 12" then BFx12"/ (t)x(w)= LF so if you have 200 BF of 2x4 200'x12"/2"x4"= 2400/8= 300 LF of lumber
What is the nominal length of wood?
The nominal length of wood refers to the standardized measurement used to describe lumber sizes before it is processed and finished. It is typically rounded to the nearest whole number, such as 2x4 or 2x6, but does not account for the actual dimensions after drying and planing, which are usually smaller. For example, a nominal 2x4 usually measures about 1.5 inches by 3.5 inches in actual size. The nominal length can also refer to the specified length of a board, often measured in feet or inches.
How many 2x6x10 boards covers 260 square feet?
To find out how many 2x6x10 boards are needed to cover 260 square feet, first calculate the area of one board. A 2x6 board is actually 1.5 inches by 5.5 inches in nominal dimensions. Converting to square feet, one board is 1.5/12 * 5.5/12 = 0.0625 square feet. A 10-foot board has an area of 0.0625 * 10 = 0.625 square feet. To cover 260 square feet, you would need 260 / 0.625 = 416 boards.
What is the actual size of a 2x2x8' wooden board?
32 cubic feet.
How to convert board feet into tons?
A board foot is a unit of volume equivalent to 144 cubic inches. To find tons, you would need to know the density of the particular wood that you are interested in. ==================================================== Boardfeet is based upon nominal dimensions. For example the nominal dimensions of a 2x4 is 2" x 4". It's actual dimension is closer to 1 1/2 inches x 3 1/2 inches. So there will be some error in the calculation if you are attempted to determine the weight of dimensional lumber. Southern Pine weights approximately 40 lbs per cubic foot. There are 1728 cubic inches in a cubic foot. There are 2000 lbs in a ton. therefore the weight of one board foot (conservatively because of the nominal dimensions) is: (40x144)/(1728x2000) tons per board foot. Sorry , don't have a calculator handy. Another way to do it is that there are about 12 board feet in a cubic foot. So a board foot would weight 40/12 lbs or 3.33 pounds. 3.33 pounds is 3.33/2000 tons. !! a lot easier!! (southern yellow pine) glenn
How 1x6 16' to cover 110 sq ft?
To determine how many 1x6 boards, each 16 feet long, are needed to cover 110 square feet, first calculate the area of one board. A 1x6 board is actually 0.75 inches thick by 5.5 inches wide, which converts to 0.0625 feet by 0.4583 feet. The area of one board is approximately 0.0287 square feet. Dividing 110 square feet by this area gives you about 3,833 boards, but since each board is 16 feet long and covers more area, you should calculate using the total coverage of each board properly. You’d actually need around 12 boards to cover that area, considering the actual dimensions.
How many board feet in a board that is 4 inches by 12 inches by 96 inches?
To calculate board feet, multiply the length (96 inches) by the width (12 inches) by the thickness (4 inches) and divide by 144. So, (96 x 12 x 4) / 144 = 32 board feet in the board.
What is the formula to figure board feet in logs?
The formula to calculate board feet in logs is: ( \text{Board Feet} = \frac{(\text{Diameter}^2 \times \text{Length})}{16} ) where the diameter is measured in inches and the length is measured in feet. This formula estimates the volume of lumber that can be produced from a log, with the result expressed in board feet.
What is the actual size of 2x10 16?
The actual size of a 2x10 is typically 1.5 inches by 9.25 inches, as the nominal dimensions of lumber do not reflect the true dimensions after drying and planing. Therefore, a 2x10 board is 1.5 inches thick and 9.25 inches wide. The length can vary, commonly available in lengths like 8, 10, 12, or 16 feet.
How many board feet of wood is there in 750-2 multiplied by 10-16'?
To find the board feet in 750-2 multiplied by 10-16', we first interpret the expression. If it's referring to a volume of wood where 750-2 means 748, and assuming "10-16'" indicates a length of 10 feet by a height of 16 feet, we can calculate the board feet. The formula for board feet is: ((Thickness \times Width \times Length) / 12). However, without specific thickness and width values, we cannot calculate the exact board feet. Please provide additional details for an accurate calculation.
What is the actual size of a 2x10x12?
A 2x10x12 board is nominally sized, meaning its actual dimensions are smaller than the stated size due to the milling process. The actual size of a 2x10 board is approximately 1.5 inches thick and 9.25 inches wide. The length remains 12 feet, so the actual dimensions are 1.5 inches by 9.25 inches by 12 feet.
How many board feet would a full grown Philippine Mahogany tree yield?
A full grown Philippine Mahogany tree can yield around 400 to 600 board feet of lumber. The actual amount can vary depending on the size and age of the tree.
