0
What else can I help you with?
What is the critical velocity of 5 inch fire hose?
1200gpm
How much water can flow through a 1 inch hose line?
The flow rate of water through a 1-inch hose line can vary based on factors such as pressure and hose length. However, under typical conditions, a 1-inch hose can deliver approximately 320 gallons per minute (GPM) at 60 PSI. This can change with different pressures and hose types, so it's essential to consider specific circumstances for precise calculations.
How long would it take to fill a gallon jug with a one eighth of an inch hose?
It depends on the flow rate in the hose and that depends on the water pressure.
How much water is in a 3 inch hose 25 feet long?
The capacity of a 25 ft hose with a diameter of 3 inches is 1.23 cubic feet. That is the maximum volume of water in the hose: there need not be any!
How long to run sprinkler hose to equal 1 inch rain?
To equal 1 inch of rainfall over a given area, you would need to apply approximately 0.623 gallons of water per square foot. If you're using a sprinkler hose, the application rate can vary based on the hose's flow rate and the distance it's running. For example, if a sprinkler hose delivers 1 gallon per minute over a specific area, you would need to run it for about 623 minutes (or roughly 10.4 hours) to achieve 1 inch of rainfall. Always check the specific flow rate of your hose to get a more accurate estimate.
What is the maximum water flow through a 3 inch fire hose?
To find the maximum flow you would need to know the maximum pressure. A typical fire nozzle pressure would be up to 100 psi with a diameter of 1 to 1.25 inches. The GPM would be between 300 GPM and 460 GPM through the nozzle. If it were simply a 3-inch pipe with an oversized pump, running at 100 psi with no nozzle, you could (in theory) move over 3,000 GPM through the pipe (ignoring friction loss). Even at 80 psi, a master stream through a 2-inch nozzle moves over 1,000 GPM.
Weight of 50 ft section of 3 inch fire hose?
Weight of 50ft section of 3 inch hose with water in it?
What is the critical velocity of 5 inch fire hose?
1200gpm
What is the maximum flow rate that can be achieved through a 1.5 inch pipe?
The maximum flow rate through a 1.5 inch pipe is typically around 9 gallons per minute.
What is the critical velocity of 2.5 inch fire hose?
300 GPM
How many gallons of water to fill a 2 inch fire hose?
A standard fire hose is 50 feet long. A hose this length with a 2-inch radius grants about 4.36 cubic feet. This volume holds 32 gallons of water.
How much water can flow through a 1 inch hose line?
The flow rate of water through a 1-inch hose line can vary based on factors such as pressure and hose length. However, under typical conditions, a 1-inch hose can deliver approximately 320 gallons per minute (GPM) at 60 PSI. This can change with different pressures and hose types, so it's essential to consider specific circumstances for precise calculations.
How many gallons of water is in a 2.5 inch fire hose fifty feet long?
A 2.5 inch fire hose has a capacity of approximately 60 gallons per 100 ft. Therefore, a 50 ft hose would hold around 30 gallons of water.
How long would it take to fill a gallon jug with a one eighth of an inch hose?
It depends on the flow rate in the hose and that depends on the water pressure.
What is the flow rate of a 3 quarter inch garden hose?
None, if the tap is turned off! It depends on the pressure!
How much water is in a 3 inch hose 25 feet long?
The capacity of a 25 ft hose with a diameter of 3 inches is 1.23 cubic feet. That is the maximum volume of water in the hose: there need not be any!
How much water can flow through 5 8ths of an inch hose Diameter times 100?
To calculate the flow rate through a hose, we first need to find the cross-sectional area of the hose. The cross-sectional area of a 5/8-inch diameter hose is (5/16)^2 * π square inches. To convert this to square feet, divide by 144. Finally, multiply this area by the flow rate in feet per second (100) to get the flow rate in cubic feet per second.
