The highest number that can be represented in a byte is 255: 1 1 1 1 1 1 1 1
If you want 256, then you need another bit ... a ' 1 ' before a byte of all zeros.
A byte consists of 8 bits, and each bit can be either a 0 or a 1. Therefore, the number of possible combinations of 0s and 1s in one byte is calculated as (2^8), which equals 256. This means there are 256 different combinations of 0s and 1s that can be represented in a single byte.
A binary number containing eight bits is referred to as one "Byte". A binary number containing four bits is referred to as one "Nibble".
One byte is commonly accepted as holding eight bits. Therefore, one byte can hold eight 1's or eight 0's or anything in between, such as three 1's and five 0's.
The number 256 in base 2 (binary) is represented as 100000000. This is because 256 is equal to (2^8), and in binary, each digit represents a power of 2. Therefore, there is a 1 in the 8th position (counting from 0) and 0s in all lower positions.
kmwkrwemfknuterfeh
A byte.
Eight binary digits are called a byte.Four binary digits are a nibble.
A binary number containing eight bits is referred to as one "Byte". A binary number containing four bits is referred to as one "Nibble".
8 bits or 2 nibbles. =D.A bit is a 1 or 0 in binary and is stored on your hard drive. Every bit of every byte of every megabyte of every gigabyte are 1s and 0s.
One byte is commonly accepted as holding eight bits. Therefore, one byte can hold eight 1's or eight 0's or anything in between, such as three 1's and five 0's.
kmwkrwemfknuterfeh
1 byte is 8 bits. That's 8 1s or 0s. 2 bytes is 8*2=16 bits (1s/0s). That is 2^16=65536 possibilities. Therefore, there are 65,536 different combinations with 2 bytes.
It counts bits of information using 1s and 0s
8 digits of binary code (either 0s or 1s) for instance 00101001 each digit takes up one bit, there are 8 bits in a byte. Usually, a byte holds 1 character, either a letter or #
A data register is temporary data being transmitted or shifted in 1s or 0s to or from the byte-organized memory array from the bidirectional data bus. The write operation shifts data into the the byte-organized memory array and the read operation shifts data into the data register.
One bit is either a zero - 0, or a one - 1. Eight bits equal one byte. And one character is exactly one BYTE. So the letter A must be converted to a specific, universally recognized number (called ASCII) and then translated to binary code - 0s and 1s. So one 8-bit code equals one character.
A computer processes data using only 1s and 0s.