A 100 acre square plot will measure 636.148 meters on each side of the square. (2,087.1 in feet)
(Assumed standard acres of 43,560 square feet or 4,046.856 square meters)
8000 sq yds is 8000x9 = 72000 sq ft. If frontage is 590 feet, then the depth is 72000/590 = 122 feet
It depends upon the volume of the bulk bag and how deep you want it covered. Divide the cubic meters in the bulk bag by the depth in meters to get your answer. For example, a bulk bag of 2 cubic meters will cover to a depth of 1 cm. 2 cubic meters / 0.01 meters depth = 200 square meters.
920 sq yards with 40-foot frontage
1 square meter. The depth is irrelevant in this question.
500 acres is 21,780,000 square feet. Assuming dthe depth is greater than the width, the depth can be any number greater than sqrt(21780000) = 4666.91 ft. Suppose the depth is D feet then a rectangular area with width = 21780000/D will have an area of 21780000 sq ft or 500 acres.
To convert meters to acres, first calculate the area in square meters by multiplying width (33m) by depth (27m) which equals 891 square meters. Then convert square meters to acres by dividing by 4046.86 (conversion factor), which gives approximately 0.22 acres.
8000 sq yds is 8000x9 = 72000 sq ft. If frontage is 590 feet, then the depth is 72000/590 = 122 feet
90 square meters
To determine the volume of dirt in this scenario, you would multiply the area (3 acres) by the depth (200 feet). First, convert acres to square feet (1 acre = 43,560 square feet). Then, multiply the area (3 acres = 130,680 square feet) by the depth (200 feet) to find the total volume of dirt.
4.5 cubic meters
It depends upon the volume of the bulk bag and how deep you want it covered. Divide the cubic meters in the bulk bag by the depth in meters to get your answer. For example, a bulk bag of 2 cubic meters will cover to a depth of 1 cm. 2 cubic meters / 0.01 meters depth = 200 square meters.
Once you multiply the length in metres by the depth in metres, the answer will be measured in square metres, e.g. 4 metres X 5 metres = 20 square metres.
To find the volume, first convert the depth to meters (7.5cm = 0.075m). Then multiply the area (59446 sqm) by the depth (0.075m) to get the volume in cubic meters. So, the volume is 4458.45 cubic meters.
920 sq yards with 40-foot frontage
The area 90 square meters times 0.075 meters gives a volume of 6.75 cubic meters.
(101.71m2)(0.1m)=10.17m3
1 square meter. The depth is irrelevant in this question.