0
What else can I help you with?
How much dirt in a square yard?
You can measure the surface of the dirt in square yards. That would be nine square feet.However the volume or amount of dirt cannot be measured in square yards or square feet. The amount of dirt in a volume of one cubic yard would be 27 cubic feet. ( 3x3x3=27 )The amount of dirt in a square yard to a depth of 0.5 feet would be 4.5 cubic feet. (3x3x0.5=4.5)
How many Cubic meters of dirt are in a hole 6 meters long 2 meters wide and one meter deep?
To calculate the volume of dirt in the hole, you multiply the length, width, and depth together. Therefore, the volume of the hole would be 6 meters x 2 meters x 1 meter = 12 cubic meters. Thus, there are 12 cubic meters of dirt in the hole.
How much dirt is in a hole that measures 3 feet wide 5 feet across and 6 feet deep?
There is no dirt in a hole. If the hole is being dug, the amount of dirt being removed would be equal to the volume of the hole, which is 3 feet wide, 5 feet across, and 6 feet deep. So, the volume of dirt being removed would be 3 x 5 x 6 = 90 cubic feet.
How many cubic meters of dirt are in a hole seven meters long and three meters wide and one meter deep?
What is the answer for rounding 14389 to the nearest thousands
What is the total volume of dirt in a hole that is 1 foot long 2 feet wide 3 feet deep?
6 cubic square
How do calculate the size of a ground wire?
Assuming that the question is being asked about "dirt"; in the United States, the volume of dirt is calculated in cubic yards. In the rest of the world, the volume of dirt is calculated in cubic meters. A cubic yard of dirt is the volume of dirt that fits in a space 1 yard (36 inches) by 1 yard by 1 yard. A cubic meter is 1M X 1M X 1M.
Will a cubic yard of gravel measure the same as a cubic yard of dirt?
No, a cubic yard of gravel will have a different volume measurement compared to a cubic yard of dirt because they have different densities. Gravel is denser and heavier, so it will take up less volume than dirt in a cubic yard.
How many cubic feet of dirt in a ton?
On average, there are about 0.83 cubic yards of dirt in a ton, which is equivalent to roughly 22 cubic feet. This can vary depending on the density of the dirt and how tightly it is packed.
What is the cubic weight of dirt for 1920 cubic feet?
To calculate the cubic weight of dirt, you need to know the density of the dirt. Let's assume the density of the dirt is 100 pounds per cubic foot. Multiply the volume (1920 cubic feet) by the density (100 pounds per cubic foot) to get the total weight. Therefore, the cubic weight of dirt for 1920 cubic feet would be 192,000 pounds.
How much dirt makes a ton?
A ton of dirt is typically about 1 cubic yard in volume, which is equivalent to 27 cubic feet. This can vary depending on the density and moisture content of the dirt.
How do you dig in Pokemon dimond?
First, you get a shovel. Then you stick the shovel in the ground. Then you get some dirt on the shovel and with the dirt on it, pull the shovel out. And then my friend, you will be digging. Your mother will be so proud of you!
A hole that is 2 yards wide 3 yards long and 1 yard deep How many cubic feet of dirt are in it?
None. It's a hole. 162 cubic feet of air. There is no dirt in a hole.
How much dirt would be in a hole 6 feet deep with a square edged sholve?
Without knowing the width of the shovel, it's not possible to calculate the volume of the hole. But whatever its volume is, there's no dirt at all in the hole.
How much dirt in a square yard?
You can measure the surface of the dirt in square yards. That would be nine square feet.However the volume or amount of dirt cannot be measured in square yards or square feet. The amount of dirt in a volume of one cubic yard would be 27 cubic feet. ( 3x3x3=27 )The amount of dirt in a square yard to a depth of 0.5 feet would be 4.5 cubic feet. (3x3x0.5=4.5)
Name something people can shovel?
you can shovel : snow dirt sand
How much dirt would be in a hole 6 ft deep and 6 ft wide that had been dug with a squared edge shovel?
32 cubic feet
How do you figure cubic feet of dirt?
To calculate the cubic feet of dirt, measure the length, width, and depth of the area in feet. Then, multiply the three dimensions together to get the volume in cubic feet. Formula: Length (ft) x Width (ft) x Depth (ft) = Cubic Feet of Dirt.
