0
What else can I help you with?
How do you caculate the mass of a cube?
Apart from calculating the volume, you would also have to know the density. Then, multiply the volume by the density.For example: A cubical water tank has 2 meters on every side. That makes for a volume of 8 cubic meters.The density of water is 1000 kg / cubic meter, so in the end result you have (8 cubic meters) x (1000 kg / cubic meter) = 8000 kg.
How find the measurement of water in 1 cuesic?
To find the measurement of water in 1 cubic meter (cubic meter is often referred to as "cubic" in shorthand), you can use the fact that 1 cubic meter of water has a mass of approximately 1,000 kilograms or 1 metric ton. In terms of volume, 1 cubic meter is equal to 1,000 liters of water. Therefore, if you are measuring water in cubic meters, 1 cubic meter corresponds to 1,000 liters of water.
How much water pressure would you get from a 80000 liter tank with 35 meter head?
You get a pressure of about 1 atmosphere (or bar) for every 10 meters.Note:The pressure has nothing to do with the volume of water behind it.It only depends on the depth or head.1 meter = 9,794.7 pa35 meters = 342.815 kpa35 meters = 114.83 feet = 49.72 psiThese figures are only for water in the tank.
How many litters of water in a pipe mm diameter length in 2000 meters?
To calculate the volume of water in a pipe, you can use the formula for the volume of a cylinder: V = πr²h, where r is the radius and h is the height (length of the pipe). First, convert the diameter in millimeters to meters to find the radius in meters. For example, if the diameter is 100 mm, the radius is 0.05 m. Plug this into the formula with h as 2000 m, and then convert the volume from cubic meters to liters (1 cubic meter = 1000 liters) to get the final result.
How many cubic centimeters are in one meter?
A wrong question. Cubic centimeters means volume and meter means length. volume is not length. There are 1 000 000 cubic centimeters in one cubic meter, if this was the question. Cheers ebs"Cubic centimeter" is a unit of space ... a volume that can hold stuff, like water."Meter" is a unit of length, like the distance from one point to another point.As you can see, they're completely different things, and neither one can beconverted to the other one. No matter how many meters of thread you have,you can never pour a gallon of water into it.
What is the volume of water in a 13 mm pipe 1 meter long?
The volume is 0.0001327 cubic meters.
What is the volume of water in a circle two meters diameter by half meter deep?
Volume = pi * radius^2 * height
What type of wave has a wavelength of 3 m forms in water with a depth of one meter?
The type of wave that has a wavelength of 3 meters in water with a depth of one meter is a shallow-water wave. Shallow-water waves have wavelengths that are much longer than the water depth, which causes the wave speed to be dependent on the water depth.
How many gallons of waters in a square meter?
A square meter of water would not be measured in gallons, as gallons are a measure of volume, while square meters are a measure of area. It would depend on the depth of the water in the square meter area to calculate the volume in gallons.
What volume of water will a meter of 30 meter diameter pipe hold in cubic meters?
The volume of water a pipe can hold can be calculated using the formula for the volume of a cylinder: V = πr^2h, where r is the radius and h is the height (or length) of the cylinder. In this case, the radius is half of the diameter, so r = 30/2 = 15 meters. Assuming the pipe is 1 meter long, the volume of water the pipe can hold is: V = π(15)^2(1) ≈ 706.86 cubic meters.
What is the volume of water in a cylinder with a radius of 2 meters and a height of 5 meters if the level of water is 1 meter?
volume = area * height = Pi * Radius^2 * height = Pi * 4 *1 = 12.6m^3 of water = 12600 L
How you can convert metric ton into square meter?
Sorry, you can only convert 1 metric ton of water to cubic meters (not square meters). Square meters are an area and cubic meters are a volume.
A 1-meter deep inset bathtub measures a meter wide and two meters long inside how much extra weight would the floor need to support if the tub were filled with water to the brim?
A one by one by two meter tub has a volume of 2 square meters or 70.63 cubic feet. Such a volume will contain 528.3 gallons of water. At 8.345 pounds per gallon, the water in the tub will weigh 4409 pounds.
How much volume is 24 cubic meters?
There are 6,340.1 US gallons of water in 24 cubic meters. (about 264.17 gallons in each cubic meter)
Are flow meter more accurate than water meters?
Flow meters and water meters are designed for different applications. Flow meters measure the rate of flow of a fluid (such as water) in a pipe, while water meters measure the total volume of water consumption. The accuracy of each type of meter depends on factors such as the design, calibration, and conditions of use. In general, both flow meters and water meters can be highly accurate when properly selected and maintained.
How do you caculate the mass of a cube?
Apart from calculating the volume, you would also have to know the density. Then, multiply the volume by the density.For example: A cubical water tank has 2 meters on every side. That makes for a volume of 8 cubic meters.The density of water is 1000 kg / cubic meter, so in the end result you have (8 cubic meters) x (1000 kg / cubic meter) = 8000 kg.
How many gallons of water a cylinder tank with 1.25 meter radius and 12 meter length carry?
Volume = 1.25 x 2 x 3.14 x 12 = 94.2 cubic meters 94.2 cubic meters = 20724 gallons
