The weight of a six-inch diameter transite pipe typically ranges from about 2.5 to 3.5 pounds per linear foot, depending on the specific design and manufacturing specifications. Transite pipe, made from a mixture of cement and asbestos, is used for various applications, including water and sewer systems. It's important to consult manufacturer specifications for precise weight, as variations can occur based on thickness and material composition.
It depends on the thickness of the material that the pipe is made from.
The outside diameter of 12-inch transite pipe is typically around 12.75 inches. Transite pipe, made from a mixture of cement and asbestos, often has a slightly larger diameter than the nominal size due to its construction. However, it's important to check specific manufacturer specifications, as dimensions may vary slightly.
Depending on class or PSI rating it is between 17.15" - 19.68".
The weight of the pipe will depend on its volume, The volume in turn, will depend oninner radius or diameter,outer radius or diameter,length.Only one of these is given.
Three-quarter inch diameter pipe refers to the outside diameter. Different pipe types of the same outside diameter usually have different inside diameters. ASTM SCH 40 pipe of 3/4 inch diameter has an inside diameter of 0.824 inches. ASTM CL 200 pipe of 3/4 inch diameter has an inside diameter of 0.930 inches because of the thinner wall.
It depends on the thickness of the material that the pipe is made from.
The outside diameter of 12-inch transite pipe is typically around 12.75 inches. Transite pipe, made from a mixture of cement and asbestos, often has a slightly larger diameter than the nominal size due to its construction. However, it's important to check specific manufacturer specifications, as dimensions may vary slightly.
Depending on class or PSI rating it is between 17.15" - 19.68".
The weight of the pipe will depend on its volume, The volume in turn, will depend oninner radius or diameter,outer radius or diameter,length.Only one of these is given.
Three 0.50 inch diameter pipes will fit into one 1.50 inch diameter pipe (hypothetically). The 0.50 inch diameters stack on top of each other until you have 1.50 inches!
The standard diameter of an inch and a quarter copper pipe is 1.25 inches.
Three-quarter inch diameter pipe refers to the outside diameter. Different pipe types of the same outside diameter usually have different inside diameters. ASTM SCH 40 pipe of 3/4 inch diameter has an inside diameter of 0.824 inches. ASTM CL 200 pipe of 3/4 inch diameter has an inside diameter of 0.930 inches because of the thinner wall.
Pipe size refers to the diameter of the pipe (in inch).
The standard size of a pipe with a 1/2 inch diameter is typically referred to as 1/2 inch nominal pipe size (NPS).
You need to specify the wall thickness in order to calculate the weight.
1/2 inch + 2*thickness of the pipe.
The volume is 3,848 cubic inches per linear inch of 70-inch diameter pipe. In terms of liquid volume, this pipe would contain 16.66 gallons of liquid per linear inch.