No, they have different meanings.Following distance is the safe distance to follow behind a moving motor vehicle.Stopping distance is the combination of the drivers reaction time to apply the brakes and the time the vehicle takes to come to a halt.
60mph (60 miles per hour)
There is no direct conversion between hours and miles. The time it takes to travel 60 miles depends on the speed at which you are traveling. If you are traveling at a constant speed of 60 miles per hour, it would take one hour to travel 60 miles.
There is no direct relationship. However another name for length is distance and if you divide time into distance you get speed (if it takes you one hour to travel 10 miles, then you are going at 10 miles an hour).
Distance divided by mpg = amount of gas If you drove 60 miles and your vehicle gets 20 mpg, you would have used 3 gallons.
Yes, the critical factor in the distance it takes to stop your vehicle is your reaction time and the braking distance. Reaction time is the time it takes for you to perceive a hazard and apply the brakes, while braking distance is the distance your vehicle travels after applying the brakes until it comes to a complete stop. Both factors contribute to the overall stopping distance of your vehicle.
Factors that determine the distance it takes to stop your vehicle include your vehicle's speed, road conditions, weather conditions, your reaction time, and the condition of your brakes and tires. These factors all play a role in the overall stopping distance of your vehicle.
Braking distance is usually measured by how fast you can stop at 60mph, 60-0, the make of a car is the factor of the stopping distance, each car varies. Your car can have disc brakes or drum brakes or both. Disc brakes are more effective than drum brakes. But braking distance is usually showed by how many feet it takes to stop from 60mph
Is based on vehicle weight and road conditions. you also have to figure in the reaction time of the driver, condition of the brakes, tires, and vehicle overall. however you can figure that at 60 mph a vehicle will travel one mile per minute
stopping distance is the distance it takes for a vehicle to come to a full stop from the moment you apply the brakes
When a vehicle increases its speed, the stopping distance also increases. Stopping distance is dependent on the vehicle's speed, the reaction time of the driver, and the braking distance required to come to a stop. With higher speeds, it takes longer for the vehicle to come to a complete stop, resulting in a longer stopping distance.
The distance from Chennai to Pamba is 424.4 miles. It takes approximately 11 hours and 27 minutes to travel by vehicle.
depends how fast you are travelling
Time = Distance/Speed. Speed = 60 mph = 1 mile per minute so it takes 265 minutes = 4 hours and 25 minutes.
At 60mph it takes 22 minutes. At 30mph it takes 44 minutes. At 90mph it takes 11 minutes.
depends how fast you are travelling
That would be Speed. Speed is the distance you are going divided by the time it takes. This will calculate the average speed you were traveling.