Want this question answered?
A graduated cylinder is typically used to measure the mass of a liquid. One could also multiply the density and volume of liquid in order to find the mass.
Meniscus.
Liquid Volume Measuring Devices: The Graduated Cylinder and Buret Like weighing, measuring liquid volume is a fundamental and frequently encountered lab task. However, liquid volume is frequently measured using either a graduated cylinder or a buret. As the name implies, a graduated cylinder is a cylindrical glass (or plastic) tube sealed at one end with a calibrated scale etched (or marked) on the outside wall. Graduated cylinders come in a range of sizes (volume capacities), and much like a measuring cup, volume is measured by adding liquid to the cylinder and comparing the liquid level to the graduated scale. The measured volume corresponds to the volume of liquid contained in the cylinder. Hence, the graduated cylinder and devices like it (volumetric flasks, Erlenmeyer flasks, and beakers) are classified as to-contain (TC) devices. The volume of liquid in the graduated cylinder is obtained directly by reading the calibrated scale. In most situations, the liquid will be water or an aqueous solution.The liquid surface is curved (U-shaped) rather than horizontal due to the relatively strong attractive force between water and glass. (The curved surface is called the meniscus.) As a general rule, the bottom of the meniscus is taken as the liquid level in the cylinder (and any other volume measuring device). The scale divisions on a graduated cylinder are generally determined by its size. For example, the 50-mL graduated cylinder is divided into 1 mL increments. However, the scale of a 10-mL graduated cylinder is divided into 0.1 mL increments, and the scale of a 500-mL graduated cylinder is divided into 5 mL increments.The graduated cylinder scale is a ruled scale, and it is read like a ruler. The scale is read to one digit beyond the smallest scale division by estimating (interpolating) between these divisions. With a 50-mL graduated cylinder, read (and record) the volume to the nearest 0.1 mL. The 10-mL graduated cylinder scale is read to the nearest 0.01 mL and the 500-mL graduated cylinder scale is read to the nearest milliliter (1 mL).A buret is a scaled cylindrical tube attached to a stopcock (valve). A buret is designed to dispense or transfer a precisely measured volume of liquid to another container. The volume of liquid dispensed is determined by reading and recording the buret scale which corresponds to the liquid level in the buret before any liquid is transferred, Vinitial (or Vi),and after the transfer is complete, Vfinal (or Vf). The volume of liquid transferred is obtained by difference (Vf - Vi) and it is sometimes designated as Vt.Burets are available in a limited range of sizes; the most common size is 50-mL. The scale of a 50-mL buret is divided into 0.1 mL increments. Therefore, when the liquid level in a buret is read, it is read (and recorded) to the nearest 0.01 mL. Water or aqueous solutions are the most common liquids used with a buret, and like the graduated cylinder the bottom of the meniscus is taken as the liquid lever. The buret and devices like it (pipet and syringe) is classified as a to-deliver (TD) devices.
The liquid curve is called a meniscus.
A Graduated Cylinder
the most accurate would be a graduated cylinder but there are beakers and other things that aren't as accurate
A graduated cylinder is used for measuring liquid volumes accurately. By using a graduated cylinder, you can precisely measure out 100ml of liquid ensuring the correct volume is dispensed. The markings on the cylinder allow for easy reading and accurate measurement.
A graduated cylinder would be more accurate for measuring the volume of a liquid compared to a beaker. This is because graduated cylinders have more precise volume markings and allow for more accurate readings due to their narrow and uniform shape.
The curve on a graduated cylinder is called a meniscus. It occurs due to surface tension between the liquid and the container, causing the liquid to curve at the edges. When measuring volume in a graduated cylinder, the bottom of the meniscus should be used for accurate readings.
A graduated cylinder is a common tool used for measuring precise volumes of liquids in a laboratory setting. It has markings along its length that allow for accurate measurement of the liquid volume.
A graduated measuring cylinder
Yes, a graduated cylinder is similar to a measuring cylinder. Both are cylindrical containers used for measuring the volume of liquids. Graduated cylinders typically have markings to indicate volume measurements, while measuring cylinders may or may not have these markings.
A graduated cylinder is used to measure the volume of a liquid precisely. It is designed with markings on the side that indicate the volume of liquid contained within it, allowing for accurate measurements to be taken. Graduated cylinders are commonly used in scientific experiments and laboratory settings.
When measuring with a graduated cylinder, you pour the liquid into the cylinder to a precise level. Read the measurement at the bottom of the meniscus, which is the curved surface of the liquid. Be sure to read the measurement at eye level for accuracy.
measuring liquid volume
a measuring cup or graduated cylinder
A graduated cylinder is one of the most accurate tools to measure liquid volume. It has clear markings for precise measurements and is designed for accurately measuring liquids.